2. Panoramica dei prodotti
  3. Encoder / sensori angolari
  4. Encoder offshore
  5. POG 83
  6. POG 83 DNV-GL
  7. POG 83 - DNV GL
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 7...24 VDC
Corrente operativa senza carico
  • ≤70 mA
Impulsi per giro
  • 512 … 4096
Sfasamento
  • 90 ° ±10°
Rapporto ciclico
  • 40…60 %
Segnale di riferimento
  • Impulso zero, ampiezza 90°
Principio di scansione
  • Ottico
Frequenza di uscita
  • ≤160 kHz
Segnale di uscita
  • A+, A-, B+, B-, R+, R-
Livelli di uscita
  • HTL/push-pull
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
  • UL approval / E217823
  • DNV GL
Location classes DNV GL
  • Temperature: D
  • Humidity: B
  • Vibration: B
  • EMC: B
  • Enclosure: C
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø115 mm
Tipo di albero
  • ø11 mm solid shaft
Carico dell‘albero massimo ammesso
  • ≤250 N assiale
  • ≤350 N radiale
Flangia
  • EURO-flangia B10
Classe di protezione EN 60529
  • IP 66
Velocità operativa
  • ≤6000 giri/min (meccanico)
Tip. coppia operativa
  • 6,5 Ncm
Rotore momento d‘inerzia
  • 450 gcm²
Materiale
  • Housing: stainless steel
  • Albero: acciaio inox
Temperatura operativa
  • -40...+85 °C
Resistenza
  • IEC 60068-2-6
  • Vibrazione 20 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 300 g, 1 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions CX (C5-M) according to ISO 12944-2
Allacciamento
  • Flange connector M23
Peso ca.
  • 3,5 kg
Scaricare
Data sheet
Operating Manual
Certificates / approvals
Declaration of conformity
3D CAD / CAE

Accessori
Accessori di montaggio
Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 60 (shaft ø11...22 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible
Connettori e cavi
Mating connector M23, solder version, 12-pin, CW

Articolo n..: 11068549

Mating connector M23 in solder version (12-pin, female , CW) for cable connection to the flange connector M23 (12-pin, male , CCW).
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Diagnostic accessories
Analyzer for encoders HENQ 1100

Articolo n..: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Articolo n..: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
In alto