Dati tecnici
Dati tecnici - Valori elettrici
Reversal tolerance
  • ≤0,1 %
Linearity tolerance
  • ≤0,15 %
Temperature coefficient
  • ± 0,05 %/K (open-circuit)
Isolation class
  • B
Calibration tolerance
  • ±3 %
Climatic test
  • Humid heat, constant (IEC 60068-2-3, Ca)
Performance
  • TDP: 40 W (speed ≥2000 rpm)
  • TDPZ: 2x 20 W (speed ≥2000 rpm)
Armature-circuit time-constant
  • <0,4 µs (TDP)
  • <0,2 µs (TDPZ)
Open-circuit voltage
  • 20...200 mV per rpm
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø120 mm
  • ø165 mm
  • ø175 mm
Tipo di albero
  • ø14...18 mm solid shaft
Flangia
  • B5, B5k, B5s, B10 and B10w flange
Classe di protezione EN 60529
  • IP 55
Velocità operativa
  • ≤6000 rpm
Torque
  • 2,5 Ncm (TDP)
  • 4,1 Ncm (TDPZ)
Rotore momento d‘inerzia
  • 17 kgcm² (TDP)
  • 20 kgcm² (TDPZ)
Carico dell‘albero massimo ammesso
  • ≤80 N assiale
  • ≤100 N radiale
Materiale
  • Housing: steel
  • Albero: acciaio inox
Temperatura operativa
  • -30...+130 °C
Resistenza
  • IEC 60068-2-6
  • Vibrazione 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 100 g, 6 ms
Peso ca.
  • 8,5 kg (TDP)
  • 10 kg (TDPZ)
Allacciamento
  • Terminal box

Scaricare
Data sheet
Operating Manual
Declaration of conformity

Accessori
Accessori di montaggio
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
The selected altAttribute does not exist! Spring disk coupling K60 WD 11PF4 + 12PF4
For encoder with solid shaft

Articolo n..: 11064874

  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible

In alto