Technical data
Données générales
Fonction
  • Elimination de l'arrière plan
Version
  • IO-Link dual channel
Source lumineuse
  • LED PinPoint, pulsée
Portée Tw
  • 20 … 120 mm
Plage de détection Tb
  • 3 … 132 mm
Indication de fonctionnement
  • LED verte
Indication encrassement / réglage
  • Indication sortie clignotante
Indication sortie
  • LED jaune
Réglage de la portée de détection
  • IO-Link
Longueur d'ondes
  • 644 nm
Suppression influence réciproque
  • Oui
Forme du faisceau
  • Point
Axe d'alignement optique
  • < 1,5°
Données électriques
Temps d'activation / désactivation
  • < 0,4 ms (High Speed Mode)
Jitter
  • < 0,21 ms (High Speed Mode)
Plage de tension +Vs
  • 10 … 30 VDC
Consommation max. (sans charge)
  • 45 mA (@ 10 VDC)
Courant absorbé moyen
  • 16 mA (@ 24 VDC)
Tension résiduelle Vd
  • < 2 VDC
Fonction de commutation
  • Claire/sombre
Circuit de sortie
  • Push-pull
Courant de sortie
  • < 50 mA
Protégé contre courts-circuits
  • Oui
Protégé contre inversion polarité
  • Oui
Communication interface
Interface
  • IO-Link V1.1
Type de port IO-Link
  • Class A
Baud
  • 38,4 kBaud (COM 2)
Temps de cycle
  • ≥ 2,7 ms
Longueur des données process
  • 32 Bit
Structure des données de processus
  • Bit 0 = SSC1 (Présence)
  • Bit 2 = Qualité
  • Bit 3 = Alarme
  • Bit 5 = SSC4 (Compteur)
  • Bit 16-31 = 16 Bit Mensuration
Paramètres réglables
  • Point de commutation
  • Hystérésis de commutation
  • Filtres de temps
  • Indicateurs d'état à LED
  • Logique de sortie
  • Circuit de sortie
  • Compteur
  • Mode de fonctionnement
  • Désactiver l'élément capteur
  • Fonction Find Me
  • Mode Teach-in
Additional data
  • Réserve de fonctionnement
  • Cyles de fonctionnement
  • Température du dispositif
Mechanical data
Width / diameter
  • 8 mm
Height / length
  • 25.1 mm
Depth
  • 15.8 mm
Type
  • Rectangular
Mechanical mounting
  • Threaded sleeves M3 (stainless steel)
Housing material
  • Plastic (ASA, PMMA)
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Cable characteristics
  • PVC / PVC 4 x 0,08 mm²
Ambient conditions
Protection class
  • IP 67
Operating temperature
  • -25 … +50 °C

Downloads
Data sheet
Operating Manual
Software Manual
Software
3D CAD / CAE

Diagrams
Sensing distance diagram
Hysteresis curve

Drawings
Connection diagram
Beam characteristic (typically)

Accessories
Peripherals
ZTEST-ALL.DIGITAL
Test unit for sensors digital

Article no.: 11084377

  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Article no.: 11084376

  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
USB IO-Link Master
USB IO-Link Master

Article no.: 11048016

  • Integration of IO-Link sensors via USB
  • Including power supply (EU, KOR, USA, AUS, UK) and USB cable
Mounting accessories
10150326
Sensofix series 10 / series 20

Article no.: 10150326

  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
ZADAP-200.STRAIGHT
Mounting bracket O200

Article no.: 11206601

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.ANGLE_L
Mounting bracket O200 (L design)

Article no.: 11206602

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.ANGLE_S
Mounting bracket O200 (S design)

Article no.: 11206603

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.SERIES10
Mounting bracket O200 - Retrofit for sensors series 10

Article no.: 11208477

  • Material: plastic

To the top