Technical data
Caractéristiques électriques
Alimentation
  • 10...30 VDC
Protection court-circuit
  • Oui
Courant de service à vide
  • ≤200 mA
Temps d'initialisation
  • ≤ 500 ms après mise tension
Interface
  • DeviceNet
Fonction
  • Multitour
Vitesse de transmission
  • 125 … 500 kBaud
Adresse de l'esclave
  • Commutateurs dans le boîtier bus
Nombre de pas par tour
  • 8192 / 13 bits
Nombre de tours
  • 65536 / 16 bits
Sorties supplémentaires
  • Rectangle TTL/HTL, TTL/RS422
Principe de détection
  • Magnétique
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Paramètres programmables
  • Nombre de pas par tour
  • Nombre de tours
  • Préréglage, mise à l'échelle, sens de rotation
Fonction de diagnostique
  • Défauts de paramétrage
LED Diagnostic
  • DUO-LED (boîtier bus) 4 LED au dos du produit
Certificat
  • CE
  • Certification UL/E217823
  • EAC
Technical data - electrical ratings (speed switch)
Switching accuracy
  • ± 2 % (or 1 Digit)
Switching outputs
  • 1 output (Open collector, solid state relay on request)
Output switching capacity
  • 30 VDC; ≤100 mA
Switching delay time
  • ≤20 ms
Technical data - mechanical design
Size (flange)
  • ø115 mm
Shaft type
  • ø11 mm solid shaft
Flange
  • EURO flange B10
  • Housing foot B3
Protection EN 60529
  • IP 66/IP 67
Operating speed
  • ≤6000 rpm
Range of switching speed
  • ns (off) = ±2...6000 rpm
Operating torque typ.
  • 10 Ncm
Rotor moment of inertia
  • 1 kgcm²
Admitted shaft load
  • ≤450 N axial
  • ≤650 N radial
Material
  • Housing: aluminium alloy
  • Shaft: stainless steel
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions CX (C5-M) according to ISO 12944-2
Operating temperature
  • -40...+85 °C
Relative humidity
  • 95 % non-condensing
Resistance
  • IEC 60068-2-6
  • Vibration 30 g, 10-2000 Hz
  • IEC 60068-2-27
  • Shock 400 g, 1 ms
Weight approx.
  • 2.7 kg (depending on version)
Connection
  • Bus connecting box
  • Terminal box incremental

Downloads
Data sheet
Operating Manual
Software Manual
Brochures / Catalogs
Declaration of conformity
Software

Accessories
Mounting accessories
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 60 (shaft ø11...22 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible

To the top