Blind hollow shaft ø10 to ø16 mm

  • Encoder with blind hollow shaft ø10...16 mm
  • Up to 2048 sinewaves cycles per turn
  • Sine output signals 1 Vpp
  • Mounting by torque support
  • Cable output radial

Through hollow shaft ø10 to ø14 mm

  • Robust industry standard
  • Wide operating temperature range
  • Up to 2048 sinewaves cycles per turn
  • Sine output signals 1 Vpp
  • LowHarmonics® signal quality
  • Detachable cable – tangential outlet
  • Perfect control quality at all rotational speeds
Connection Cavo 1 m Board connector, 8-pin
Consumption w/o load ≤90 mA ≤100 mA
Emitted interference EN 61000-6-3
Interference immunity EN 61000-6-2
Material Housing: aluminium, black, powder-coated
Shaft: stainless steel
Housing: aluminium
Shaft: stainless steel
Mounting kit 050
Operating speed ≤8000 giri/min ≤6000 giri/min
Operating temperature -20...+85 °C -30...+100 °C
Output frequency ≤180 kHz (-3 dB) ≤180 kHz (-3 dB)
Output signals A, B, 0 A, B, 0
Output stages SinCos 1 Vpp SinCos 1 Vpp
Protection EN 60529 IP 65 IP 65
Relative humidity 90 % non-condensing 90 % non-condensing
Resistance EN 60068-2-6
Vibration 10 g, 55-2000 Hz
EN 60068-2-27
Shock 30 g, 11 ms
EN 60068-2-6 Vibration 20 g, 60-2000 Hz
EN 60068-2-27 Shock 100 g, 6 ms
Reverse polarity protection Yes Yes
Sensing method Optical Optical
Shaft type ø10...16 mm (blind hollow shaft) ø10 mm (through hollow shaft)
ø12 mm (through hollow shaft)
ø14 mm (through hollow shaft)
Sinewave cycles per revolution 1024 … 2048 1024 … 2048
Size (flange) ø80 mm ø58 mm
Starting torque ≤0,01 Nm (+20 °C) ≤0,015 Nm (+20 °C)
Voltage supply 5 VDC ±10 %
8...30 VDC
5 VDC ±10 %
8...30 VDC
Weight approx. 550 g 150 g
Na szczyt