Netherlands
nl
English
Technical data
Side A
- Head A: Connection
- M8
- Head A: Angle cable outlet
- 90°
- Head A: Gender
- Female
- Head A: Coding
- A
- Head A: No. of poles
- 4
- Head A: LED
- No
- Head A: Width across flats
- SW9
- Head A: Tightening torque
- 0.4 Nm
- Head A: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head A: Body color
- Black
- Labeling sleeve side A
- Yes
Side B
- Head B: Connection
- Open-ended wires
- Labeling sleeve side B
- Yes
Cables
- Cable length
- 1000 cm
- Length tolerance
- ± 15 cm
- Stripping length
- 20 mm
- Shielded
- No
- Conductor structure
- 32 × 0.1 mm
- External sheath: Material
- PUR
- External sheath: Color
- Black
- Cable diameter
- 4.5 mm ± 5%
- Wire cross section
- 0.25 mm²
Electrical data
- Operating voltage
- max. 50 V AC / 60 V DC
- Nominal voltage
- 300 V
- Contact resistance
- max. 30 mOhm
- Operating current per contact
- max. 4 A
Mechanical data
- Head A: Degree of protection
- IP65, IP66K, IP67
- Bending radius (mobile)
- min. 10 × outer diameter
- Bending radius (fixed)
- min. 5 × outer diameter
- No. of bending cycles (C-track)
- approx. 10000000 Cycles
- Torsion speed
- max. 35 cycles/min
- Torsion stress in °
- ± 180 °/m
- No. of torsion cycles
- approx. 2000000 Cycles
- Acceleration (C-track)
- max. 10 m/s²
- Travel speed (C-track)
- max. 3 m/s
Environmental conditions
- Temperature range (mobile)
- - 25 ...+ 80 °C
- Temperature range (fixed)
- - 25 ...+ 80 °C
- Cable: Temperature range (fixed)
- - 40 ...+ 80 °C
- Dragchain capable
- Yes
- Head A: Chemical resistance
- No
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- ASTM 1 oil, mineral oils, limited to hydraulic oils
- Head A: Acid and alkali resistant
- No
- Cable: Chemical resistance
- Good (DIN EN 60811-404)
- Cable: Flame resistance
- Conform UL 1581 §1090 (H); CSA FT2; IEC 60332-2-2
- Cable: Oil resistance
- Good (DIN EN 60811-404)
- Cable: Silicone-free
- Yes
Downloads
Data sheet
-
Data sheet – CAM8.A4-11232549
-
Data sheet – CAM8.A4-11232549
Certificates / approvals
-
Declaration of Conformity – CE
