2. Product Overview
  3. Rotary encoders / angle sensors
  4. Real-time Ethernet encoders
Product portfolio
The selected altAttribute does not exist!

58 mm – compact precise optical

OptoTurn EAL580

  • Solid shaft, blind or through hollow shaft
  • Optical sensing, high accuracy of up to ± 0.01°
  • PROFINET, EtherCAT, EtherNet/IP
  • Industry 4.0 and IIoT ready via OPC UA
  • Extremely small installation depth
Open in product selector
The selected altAttribute does not exist!

58 mm – integrated interface, robust magnetic

MAGRES EAM580

  • Solid shaft, blind hollow shaft or bearingless kit
  • Precise magnetic sensing
  • Angular accuracy up to ± 0.15°
  • PROFINET, EtherCAT, EtherNet/IP
  • Industry 4.0 and IoT ready via OPC UA
Open in product selector
The selected altAttribute does not exist!

The new absolute reference

HMG10 / PMG10

  • Design 105 mm and 115 mm
  • Hollow shaft ø16 ... 20 mm
  • Solid shaft ø11 mm with EURO flange B10
  • Precise magnetic singleturn position sensing
  • Gearless and batteryless multiturn micro-generator
  • Total resolution up to 40 bits
  • PROFINET, EtherCAT, EtherNet/IP
  • Additional incremental signals with zero pulse
  • Robust HeavyDuty mechanic
Open in product selector
Your benefits
  • High system availability
    • Supports protocols for compensation of individual failures in ring topologies
  • Reduced downtimes
    • Supports Simple Device Replacement, easy replacement of identical devices through neighbourhood detection
  • Future-proof for Industry 4.0 and IoT
    • Access to parameters and additional information via PROFINET & OPC UA, Cloud Service compatible for optimizing processes such as preventive maintenance
  • Simple & flexible product selection
    • Extensive portfolio, all common shaft, flange & connector versions
  • Very simple device connection
    • High variance at Ethernet interfaces, PROFINET, EtherCAT and EtherNet/IP
  • Suitable for every application
    • Encoder variants for all environmental conditions and different mechanical requirements in industry, outdoor and heavy duty applications
Applications
  • Packaging machines
  • Filling plants
  • Handling and assembly systems
  • Mining and opencast mining
  • Lifting gear and lifting systems
  • Material transport and conveyor technology
  • Wood, plastic or metal processing
  • Production and processing of paper and cardboard
  • Mechanical Engineering
  • Steel and rolling mills
  • Port and crane technology
Technology
The selected altAttribute does not exist!

PROFINET – for maximum availability

  • Increased machine and plant availability through Media Redundancy Protocol (MRP): In the event of line or switch failure in ring topology, the system continues to run fault-free. Only a warning message appears.
  • No pre-configuration before device replacement due to Link Layer Discovery Protocol (LLDP): In hard use, even the best devices can fail once. To enable a time-saving replacement, the OptoTurn EAL580 uses neighborhood recognition via LLDP. The same devices can be replaced at any time without pre-configuration.
  • Support of real-time (RT) and isochronous real-time (IRT) operating modes: The OptoTurn EAL580 always works according to the requirements of the application.
The selected altAttribute does not exist!

EtherCAT – for extremely fast and precise applications

  • Simple and intuitive commissioning: The device address is conveniently assigned e.g. using the TwinCAT commissioning software. Firmware updates of the encoder are controlled via the protocol file access over EtherCAT (FoE).
  • Minimum cycle time (62.5 μs) and low jitter: For demanding applications and high precision control of the machine in real-time.
  • Support of the operating modes Free Run, Synchronous Mode and Distributed Clocks. The OptoTurn EAL580 always adapts to the requirements of the respective application. Regardless of whether the values are freely determined or provided in a highly synchronous manner.

 

The selected altAttribute does not exist!

EtherNet/IP – for universal data access

  • Increased plant availability through Device Level Ring (DLR): In the case of an interruption in a plant network in ring topology, the OptoTurn EAL580 ensures that the encoder data are still sent to the control.
  • Integrated web server for process data access from the office network via control to the rotary encoder: Storage and analysis on any server or in the cloud. Access management and the highest security are ensured by the control system.
Downloads
Brochures / Catalogs

You may also be interested in
The selected altAttribute does not exist!
Ethernet Sensor Portfolio

Real-time communication and a multitude of sensor functions

 The selected altAttribute does not exist!
Digitalization

The key to digital factory are Connected Smart Sensor Solutions
To the top