2. Apercu des produits
  3. Codeurs / Capteurs angulaires
  4. Combinaisons HeavyDuty
  5. Codeur incrémental avec commutateur de vitesse
  6. POG 90 + ESL 90
Dados técnicos
Caractéristiques électriques
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Certificat
  • CE
Caractéristiques électriques (codeur)
Alimentation
  • 9...30 VDC; 5 VDC ±5 %
Courant de service à vide
  • ≤100 mA
Impulsions par tour
  • 1024 … 10000
Mode de déphasage
  • 90 ° ±8°
Période
  • 44…56 %
Signal de référence
  • Top zéro, largeur 90°
Fréquence de sortie
  • ≤250 kHz
Signaux de sortie
  • K1, K2, K0 + compléments
Etage de sortie
  • HTL
  • TTL/RS422
Principe de détection
  • Optique
Caractéristiques électriques (Commutateur de vitesse)
Précision de commutation
  • ± 4 % (≤1500 t/min)
  • ± 2 % (>1500 t/min)
Hystérésis de commutation
  • = 30 % seuil de vitesse
Sorties de commutation
  • 1 sortie, réglage en vitesse
Puissance de commutation
  • ≤6 A / 250 VAC; ≤1 A / 48 VDC
  • (EAC: <50 VAC / 75 VDC)
Courant commuté minimal
  • 100 mA
Retardement à la commut.
  • ≤40 ms
Dados técnicos - projeto mecânico
Size (flange)
  • ø115 mm
Shaft type
  • ø11 mm solid shaft
Admitted shaft load
  • ≤250 N axial
  • ≤350 N radial
Flange
  • EURO flange B10
Protection EN 60529
  • IP 66
Operating speed
  • ≤6000 rpm
Range of switching speed (ns)
  • 650...6000 rpm
Operating torque typ.
  • 3 Ncm
Rotor moment of inertia
  • 320 gcm²
Material
  • Housing: aluminium die-cast
  • Shaft: stainless steel
Operating temperature
  • -20...+85 °C
Resistance
  • IEC 60068-2-6
  • Vibration 5 g, 10-2000 Hz
  • IEC 60068-2-27
  • Shock 50 g, 11 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions C4 according to ISO 12944-2
Connection
  • 2x terminal box
Weight approx.
  • 2,6 kg
Downloads
Data sheet
Operating Manual
Declaration of conformity

Acessórios
Mounting accessories
Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 60 (shaft ø11...22 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Diagnostic accessories
Analyzer for encoders HENQ 1100

Artigo nº: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Artigo nº: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
To the top