Produktportfolio
Sensoren im Metallgehäuse

Sensoren im Metallgehäuse

  • Zylindrische (ab Ø12 bis 30 mm) und quaderförmige (20 mm) Sensoren
  • Bündig einbaubar
  • Empfindlichkeit einstellbar
  • Varianten mit fixem Schaltpunkt
  • Schaltabstand bis 15 mm
Abrir en el selector de productos
Sensoren im Kunststoffgehäuse

Sensoren im Kunststoffgehäuse

  • Zylindrische (ab Ø12 bis 30 mm) und quaderförmige (30 mm) Sensoren
  • Bündig / nicht bündig einbaubar
  • Empfindlichkeit einstellbar
  • Varianten mit fixem Schaltpunkt
  • Schaltabstand bis 30 mm
Abrir en el selector de productos
Non-contact – Particularly flat design

Besonders flache Bauform

  • 52,4 × 25 × 6  mm
  • Versenkbarer (bündiger) Einbau
  • Flexible und einfache Montage mit  einzigartigem Montagerahmen
  • Kaskadierung mehrerer Sensoren möglich
  • Schaltabstand bis 15 mm
Abrir en el selector de productos

Sus ventajas
  • Larga duración y elevada seguridad del proceso gracias al principio de medición sin contacto
    • Distancias de detección de hasta 30 mm o formatos muy planos permiten el montaje en puntos protegidos y cerca del proceso
  • Fiable detección de objetos de materiales muy diferentes
    • Independiente del color, el brillo y las propiedades de la superficie
    • Inmunes al polvo y la suciedad
    • Las variantes enrasadas son especialmente apropiadas para la detección de materiales no conductores (dieléctricos)
    • Las variantes no enrasadas están optimizadas para la detección de materiales conductores y de niveles

Aplicaciones

Technology
Capacitive sensors – Technology

The capacitive sensor basically functions like an open capacitor. An electrical field is formed between the measuring electrode and the GND electrode. If a material with a dielectric constant εr greater than air enters the electrical field,  the capacity of the field increases depending on the εr of this material. The electronics measure this capacity increase, the generated signal is conditioned during subsequent signal processing and causes output switching at a corresponding magnitude.

Flush-mountable and non-flush mounting procedure
Flush mounting of flush-mountable capacitive sensors is possible in all materials. The minimum distance between the sensors must be observed. For non-flush mountable capacitive sensors, a free zone must be created around the sensor head which must not contain any damping material.


Downloads
Technical and Application Reports / White Paper


To the top