2. Product Overview
  3. Object detection
  4. Ultrasonic sensors
  5. Miniature
  6. Cubical, slim design
  7. U300.D50-DP1B.72N
Technical data
General data
Scanning range Sd
  • 15 … 500 mm
Scanning range close limit Sdc
  • 15 … 500 mm
Scanning range far limit Sde
  • 15 … 500 mm
Repeat accuracy
  • < 0,5 mm
Resolution
  • < 0,3 mm
Response time ton
  • < 40 ms
Release time toff
  • < 40 ms
Temperature drift
  • < 2 % of distance to target So
Power-up drift
  • Compensated after 15 min.
Sonic frequency
  • 290 kHz
Adjustment
  • qTeach, line-Teach
Alignment aid
  • Light indicator flashing
Light indicator
  • LED yellow
Power on indication
  • LED green
Alignment measuring axis
  • < 2°
Electrical data
Voltage supply range +Vs
  • 12 … 30 VDC
Current consumption typ.
  • 35 mA
Output circuit
  • Voltage output
Output signal
  • 0 ... 10 V / 10 ... 0 V
Residual ripple
  • < 10 % Vs
Short circuit protection
  • Yes
Reverse polarity protection
  • Yes, Vs to GND
Mechanical data
Type
  • Rectangular
Housing material
  • Plastic (ASA, PMMA)
Width / diameter
  • 12,9 mm
Height / length
  • 32,2 mm
Depth
  • 23 mm
Connection types
  • Connector M8 4 pin
Ambient conditions
Operating temperature
  • -25 … +65 °C
Storage temperature
  • -40 … +75 °C
Protection class
  • IP 67
Downloads
Data sheet
Installation and operating instructions
3D CAD / CAE

Diagrams

Typical sonic cone profile

(png | 108 KB)
Drawings

Dimension drawing

(png | 103 KB)

Connection diagram

(png | 83 KB)

Pin assignment

(png | 129 KB)
Accessories
Peripherals
ZTEST-ALL.ANALOG
Peripherals

Article no.: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
Mounting accessories
11104963
Mounting accessories

Article no.: 11104963
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
11102423
Mounting accessories

Article no.: 11102423
  • Material: Steel
11124807
Mounting accessories

Article no.: 11124807
  • Material: Steel
Connectors and mating connectors
ESG 32AH0200
Connectors and mating connectors

Article no.: 10127800

  • Connecting cable for Connector type M8
  • 2 m
  • Unshielded
  • Suitable for flexible cable carriers
  • ATEX
ESG 32AH0500
Connectors and mating connectors

Article no.: 10127801

  • Connecting cable for Connector type M8
  • 5 m
  • Unshielded
  • Suitable for flexible cable carriers
  • ATEX
ESG 32AH1000
Connectors and mating connectors

Article no.: 10127802

  • Connecting cable for Connector type M8
  • 10 m
  • Unshielded
  • Suitable for flexible cable carriers
  • ATEX
ESW 31AH0200
Connectors and mating connectors

Article no.: 10133827

  • Connecting cable for Connector type M8
  • 2 m
  • Unshielded
  • Suitable for flexible cable carriers
  • ATEX
ESW 31AH0500
Connectors and mating connectors

Article no.: 10132816

  • Connecting cable for Connector type M8
  • 5 m
  • Unshielded
  • Suitable for flexible cable carriers
  • ATEX
ESW 31AH1000
Connectors and mating connectors

Article no.: 10132435

  • Connecting cable for Connector type M8
  • 10 m
  • Unshielded
  • Suitable for flexible cable carriers
  • ATEX
To the top