Shielded cable 3 wires, 5,0 m

  • shielded process interface cable for Baumer VisiLine® cameras
  • M8/3-pin male connector to open wires
  • cable carrier compatible
  • length 5,0 m
  • M8, male, A-coded, 3-poles; PUR, 500 cm, shielded, free cable end
  • Dragchain capable
  • Head A: IP65, IP66K, IP67
  • Cable: good resistance against chemicals, flames, oils
  • Halogen free
AWG 22
Cable diameter 5 mm ± 5%
Cable length 500 cm
Conductor structure 42 × 0.1 mm
External sheath: Color Black
External sheath: Material PUR
Length tolerance ± 7.5 cm
Shielded Yes
Stripping length 20 mm
Wire cross section 0.34 mm²
Electrical data
Connectors M8 male connector, screw lock
Contact resistance max. 30 mOhm
Nominal voltage 300 V
Number of poles 3
Operating voltage max. 50 V AC / 60 V DC
Operating voltage (only UL listed) 30 V AC/DC
Operating current per contact max. 4 A
Shielding yes
Environmental conditions
Cable: Chemical resistance Good (DIN EN 60811-404)
Cable: Flame resistance Conform UL 1581 §1090 (H), CSA FT2, IEC 60332-2-2
Cable: Oil resistance Good (DIN EN 60811-404)
Cable: Silicone-free Yes
Cable: Temperature range (fixed) - 40 ...+ 80 °C
Dragchain capable Yes
Head A: Acid and alkali resistant No
Head A: Chemical resistance No
Head A: Flame resistance HB (UL 94)
Head A: Oil resistance ASTM 1 oil, mineral oils, limited to hydraulic oils
Head A: Pollution degree 3
Protection class IP 65/67 (camera side)
Resistance to oil DIN EN 60811-2-1
Temperature range (fixed) - 25 ...+ 80 °C
Temperature range (mobile) - 25 ...+ 80 °C
Data interface Process interface
Mechanical data
Acceleration (C-track) max. 5 m/s²
Bending cycles 4000000
Bending radius (fixed) min. 5 × outer diameter
Bending radius (mobile) min. 10 × outer diameter
Cable length [m] 5 m
Head A: Degree of protection IP65, IP66K, IP67
Material PUR, halogen-free
No. of torsion cycles approx. 2000000 Cycles
No. of bending cycles (C-track) approx. 5000000 Cycles
Smallest bending radius moved installation 50 mm
Smallest bending radius static 25 mm
Torsion speed max. 35 cycles/min
Torsion stress in ° ± 30 °/m
Travel speed (C-track) max. 3.3 m/s
Use in cable carriers yes
Weight ≤ 177 g
Side A
Head A: Angle cable outlet
Head A: Body color Black
Head A: Coding A
Head A: Connection M8
Head A: Gender Male
Head A: Knurled nut material Brass, surface Ni
Head A: LED No
Head A: No. of poles 3
Head A: Tightening torque 0.4 Nm
Head A: Width across flats AF9
Labeling sleeve side A Yes
Side B
Head B: Connection Open-ended wires
Labeling sleeve side B Yes
To the top