2. Product Overview
  3. Product comparison

Distance sensors

  • 50 … 400 mm
  • pulsed point source LED
  • analog
  • IO-Link
  • connector M12
  • 50 °C
  • IP 68/69K & proTect+
  • Distance measurement via IO-Link or analog output
  • Outstanding reliability and unrivalled immunity against ambient light
  • Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
  • Manipulation-proof, simple teach-in via qTeach
  • IO-Link for extended parameterization options and additional diagnostic data
  • Robust stainless steel housing in washdown design
Inquire
Ambient conditions
Operating temperature 0 … +50 °C -25 … +60 °C
Protection class IP 68/69K & proTect+ IP 68/69K & proTect+
Shock (semi-sinusoidal) IEC 60068-2-27:2009
50 g / 11 ms, 10 impulses per axis and direction
Storage temperature -40 … +70 °C
Vibration (sinusoidal) IEC 60068-2-6:2008
10 g at f = 10 - 2000 Hz, duration 150 min per axis
Communication interface
Additional data Distance
Excess gain
Device temperature
Adjustable parameters Switching point
Operation mode
Time filters
LED-function
Output logic
Output circuit
Analog output characteristic
Deactivate the sensor element
Locater function
Teach-in mode
Baud rate 230,4 kBaud (COM 3)
Cycle time ≥ 0.7 ms
IO-Link port type Class A
Interface IO-Link V1.1 IO-Link V1.1.3
Process data length 48 Bit
Process data structure Bit 0 = SSC1 (distance)
Bit 1 = SSC2 (distance)
Bit 2 = quality
Bit 3 = alarm
Bit 8-15 = scale factor
Bit 16-47 = 32 Bit measurement
Electrical data
Alarm output Push-pull
Current consumption max. (no load) 80 mA 30 mA
Load resistance < (+Vs - 6 V) / 0,02 A
Load resistance (analog I) < (+Vs - 10 V) / 0,02 A
Output circuit Analog Analog 4 ... 20 mA
Push-pull / IO-Link
Output current 100 mA 100 mA (push-pull)
Output signal 4 ... 20 mA
Response time / release time < 3 ms < 1.5 ms (Raw)
< 2.25 ms (High Speed Mode)
< 4.5 ms (Standard Mode)
< 14 ms (High Accuracy Mode)
Reverse polarity protection Yes, Vs to GND Yes, Vs to GND
Short circuit protection Yes Yes
Switching output Light operate, switchable
Voltage drop Vd <2 VDC
Voltage supply range +Vs 12 … 26 VDC 12 … 30 VDC
General data
Adjustment IO-Link Teach-in and IO-Link
Alignment optical axis < 1°
Approvals/certificates Ecolab
Beam diameter 8 mm
Beam type Point Point
Linearity error ± 1.5 … 4 mm ± 3 % Mr
Measuring distance Sd 50 … 400 mm 60 … 550 mm
Measuring range Mr 490 mm
Output indicator LED yellow
Power on indication LED green LED green
Repeat accuracy ≤ 200 … 5000 µm (Raw)
≤ 150 … 3750 µm (High Speed)
≤ 100 … 2500 µm (Standard)
≤ 50 … 1250 µm (High Accuracy)
Resolution 100 … 1000 µm
Soiled lens indicator LED red
Special type Washdown design
Suppression of reciprocal influence Yes
Teach-in range min. > 20 mm
Temperature drift < 0,1 % Sde/K < 0,3 % Sde/K
Type Distance measuring
Light Source
Light source Pulsed point source LED Pulsed PinPoint LED
Wave length 660 nm 630 nm
Mechanical data
Connection types Connector M12 Connector M12 5 pin
Depth 34.3 mm 37.7 mm
Design Rectangular Rectangular
Front (optics) PMMA PMMA
Height / length 51 mm 47.9 mm
Housing material Stainless steel 1.4404 (V4A); LSR Stainless steel 1.4404 (V4A)
Width / diameter 19.6 mm 20.2 mm
To the top