USB 3.0, 5 Megapixel, Color

  • 2448 x 2048 px
  • Sony IMX264
  • 2/3" CMOS
  • 35 fps
  • USB 3.0

USB 3.0, 5 Megapixel, Color

  • 2448 x 2048 px
  • Sony IMX264
  • 2/3" CMOS
  • 35 fps
  • USB 3.0
Acquisition formats
Image formats, aquisition frame rate max. (Burst Mode) Full Frame, 2448 × 2048 px, max. 35 fps
Full Frame, 2448 × 2048 px, max. 35 fps
Full Frame, 2448 × 2048 px, max. 35 fps
Full Frame, 2448 × 2048 px, max. 35 fps
Image formats, interface frame rate max. Full Frame, 2448 × 2048 px, max. 35 fps
Binning 2×2, 1224 × 1024 px, max. 35 fps
Binning 2×1, 1224 × 2048 px, max. 35 fps
Binning 1×2, 2448 × 1024 px, max. 35 fps
Full Frame, 2448 × 2048 px, max. 35 fps
Binning 2×2, 1224 × 1024 px, max. 35 fps
Binning 2×1, 1224 × 2048 px, max. 35 fps
Binning 1×2, 2448 × 1024 px, max. 35 fps
Pixel formats BayerRG8
BayerRG10
BayerRG12
BayerRG12 Packed
Mono8
Mono10
Mono12
Mono12 Packed
RGB8
BGR8
BayerRG8
BayerRG10
BayerRG12
BayerRG12 Packed
Mono8
Mono10
Mono12
Mono12 Packed
RGB8
BGR8
Camera features
Acquisition / Interface Burst Mode
Adjustable Framerate
Short Exposure Time Enable
Device Link Throughput Limit
Internal Image Buffer
Burst Mode
Adjustable Framerate
Short Exposure Time Enable
Device Link Throughput Limit
Internal Image Buffer
Additional Functions User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Save Custom Data
User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Auto Functions Exposure Auto
Gain Auto
White Balance Auto
Color Transformation Auto
Exposure Auto
Gain Auto
White Balance Auto
Color Transformation Auto
Basic Functions Exposure
Gain / Color Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Exposure
Gain / Color Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Calibration data Integrated color correction matrix (3000 K, 5000 K, 6500 K, 9500 K, and user defined)
Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
Customer data storage (128 bytes user defined)
Image Pre-processing Image Flipping (X/Y)
Color Processing (RGB, BGR, Mono)
Color Enhancement (with optimized ColorTransformationMatrix)
LUT / Gamma
Image Flipping (X/Y)
Color Processing (RGB, BGR, Mono)
Color Enhancement (with optimized ColorTransformationMatrix)
LUT / Gamma
Internal image buffer 445 MB
31 images (Trigger Mode)
1 image (Free Running Mode)
445 MB
31 images (Trigger Mode)
1 image (Free Running Mode)
Process Synchronization Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
Chunk data inside transferred image
Encoder support via Counter End trigger source
Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
Chunk data inside transferred image
Encoder support via Counter End trigger source
Synchronization free running
trigger
free running
trigger
Trigger delay 0 … 2 sec, tracking and buffering of up to 256 trigger signals 0 … 2 sec, tracking and buffering of up to 256 trigger signals
Trigger sources Hardware
Software
Hardware
Software
Conformity
Conformity CE
RoHS
KC (MISP-REI-BkR-VCXU-50M)
EAC
BIS-CRS (R-41207004)
CE
RoHS
Data quality (EMVA 1288 typical)
Dark noise 2.17 e- 2.03 e-
Dynamic range 71.4 dB 70.8 dB
Quantum efficiency 47.4 % @ 465 nm
58.4 % @ 536 nm
54 % @ 631 nm
47.4 % @ 465 nm
58.4 % @ 536 nm
54 % @ 631 nm
46.6 % @ 467 nm
58.3 % @ 533 nm
52.9 % @ 630 nm
Saturation capacity 10632 e- 9382 e-
Signal-to-noise ratio 40.3 dB 39.7 dB
Digital I/Os
Lines 1 input line
1 output line
2 general purpose lines
1 input line
1 output line
2 general purpose lines
Electrical data
Operating voltage 5 VDC (via USB3.0 interface) 5 VDC (via USB3.0 interface)
Power consumption Approx. 2.7 W @ 75 fps Approx. 2.4 W @ 35 fps
Environmental conditions
Humidity 10 … 90 % (non-condensing) 10 … 90 % (non-condensing)
Operating temperature 0 … +65 ° @ T = measurement point 0 … +65 ° @ T = measurement point
Protection class IP 40 (with mounted lens and cable) IP 40 (with mounted lens and cable)
Storage temperature -20 … +70 °C -20 … +70 °C
Image preprocessing
Analog controls Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)
Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)
Color models Mono
Raw Bayer
RGB
Mono
Raw Bayer
RGB
Interfaces and connectors
Data interface USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B
Power supply via USB 3.0 interface via USB 3.0 interface
Process interface M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)
Mechanical data
Depth 38 mm 38 mm
Height 29 mm 29 mm
Lens mount C-mount C-mount
Material zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 zinc die casting, baked varnish
Weight ≤ 90 g ≤ 90 g
Width 29 mm 29 mm
Non-volatile memory
Flash memory size 128 kB 128 kB
Sensor information
Exposure time 0.001 … 60000 ms 0.001 … 60000 ms
Mono/Color Color Color
Pixel size 3.45 × 3.45 µm 3.45 × 3.45 µm
Resolution 2448 × 2048 px 2448 × 2048 px
Sensor Sony IMX264 Gen2 Sony IMX264 Gen2
Sensor type 2/3″ CMOS 2/3″ CMOS
Shutter type Global shutter Global shutter
To the top