Technical data
general data
special type
  • liquid level sensor for oil
mounting type
  • non-flush
version
  • adhesion resistant
measurement type
  • contact with medium
approvals/certificates
  • EN 60947-5-2 / EN 60947-5-7
  • EN ISO 14982:2009
  • ISO 15003:2006, Sec 5.13
  • ISO 13766:2006-05
  • EN 13309:2010
field of application
detection of non-conductive media
  • no
fill level detection through container
  • no
liquids in direct contact
  • yes
object detection / bulk goods
  • no
electrical data
voltage supply range +Vs
  • 4,75 … 5,25 VDC
current consumption max. (no load)
  • 42 mA
current consumption typ.
  • 10 mA
output circuit
  • voltage output
output state
  • in air 2,75 ... 3,25 V
  • in liquid 1,25 ... 1,75 V
  • fault 0,50 ... 1,00 V
typ. response time
  • < 1000 ms
load resistance
  • ≥ 930 Ohm
capacitive load
  • < 200 nF
short circuit protection
  • yes
reverse polarity protection
  • no
mechanical data
type
  • cylindrical threaded
housing material
  • PA 10T/X
dimension
  • 22 mm
housing length
  • 87 mm
connection types
  • connector AMPSEAL 16 3 pin
tightening torque max.
  • 14 Nm (min. 10 Nm)
fluid port
  • O-Ring port M22 x 1,5 (ISO 6149-1)
ambient conditions
operating temperature
  • -40 … +85 °C
media temperature
  • -40 … +100 °C
storage temperature
  • -55 … +125 °C
protection class
  • IP 69K

Downloads
3D CAD data
assembly instruction
Certificates / approvals

Drawings

dimension drawing

connection diagram


To the top