Technical data
general data
scanning range Sd
  • 70 … 1000 mm
scanning range close limit Sdc
  • 70 … 1000 mm
scanning range far limit Sde
  • 70 … 1000 mm
repeat accuracy
  • < 0,5 mm
resolution
  • < 0,3 mm
response time ton
  • < 40 ms
release time toff
  • < 40 ms
temperature drift
  • < 2 % of distance to target So
power-up drift
  • compensated after 15 min.
sonic frequency
  • 200 kHz
adjustment
  • qTeach, line-Teach
alignment aid
  • light indicator flashing
light indicator
  • LED yellow
power on indication
  • LED green
alignment measuring axis
  • < 2°
electrical data
voltage supply range +Vs
  • 12 … 30 VDC
current consumption typ.
  • 35 mA
output circuit
  • current output
output signal
  • 4 ... 20 mA / 20 ... 4 mA
residual ripple
  • < 10 % Vs
short circuit protection
  • yes
reverse polarity protection
  • yes, Vs to GND
mechanical data
type
  • cylindrical threaded
housing material
  • stainless steel (V2A) / TR90
coating active face
  • PEEK
width / diameter
  • 18 mm
height / length
  • 64 mm
connection types
  • connector M12 5 pin
ambient conditions
operating temperature
  • -25 … +65 °C
storage temperature
  • -40 … +75 °C
protection class
  • IP 69
protection class (connection)
  • IP 67

Downloads
3D CAD data
Installation and operating instructions

Diagrams

typical sonic cone profile


Drawings

dimension drawing

connection diagram

pin assignment


Accessories
peripherals
11084376
Test unit for sensors analog & digital

Article no.: 11084376

  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)

10164264
Sonic beam deflector series 18 rectangular

Article no.: 10164264

  • Sonic beam deflector for ultrasonic sensors

mounting accessories
10151658
Sensofix series 18

Article no.: 10151658

  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel

ZADAP-M18.STANDARD
Mounting bracket series 18

Article no.: 11172096

  • Material: Steel galvanized

ZADAP-M18.SHORT
Mounting bracket short series 18 (L design)

Article no.: 11171584

  • Material: Steel galvanized

ZADAP-M18.LONG
Mounting bracket long series 18 (L design)

Article no.: 11172095

  • Material: Steel galvanized

ZADAP-M18.SWING
Mounting bracket for adjustment for sensors series 18

Article no.: 11172110

  • Material: Plastic (ABS TERLURAN)

connectors and mating connectors
ESG 34CH0200G
Connector M12, 5 pin, straight, 2 m, shielded

Article no.: 11046264

  • connecting cable for connector type M12
  • 2 m
  • shielded
  • suitable for flexible cable carriers

ESG 34CH0500G
Connector M12, 5 pin, straight, 5 m, shielded

Article no.: 11046266

  • connecting cable for connector type M12
  • 5 m
  • shielded
  • suitable for flexible cable carriers

ESG 34CH1000G
Connector M12, 5 pin, straight, 10 m, shielded

Article no.: 10155587

  • connecting cable for connector type M12
  • 10 m
  • shielded
  • suitable for flexible cable carriers

ESW 33CH0500G
Connector M12, 5 pin, angular, 5 m, shielded

Article no.: 11046261

  • connecting cable for connector type M12
  • 5 m
  • shielded
  • suitable for flexible cable carriers

ES 14C PG7
Connector M12, 5 pin, angular

Article no.: 10138672

  • connector not pre-assembled for connector type M12
  • unshielded

ES 18C PG7
Connector M12, 5 pin, straight

Article no.: 10138673

  • connector not pre-assembled for connector type M12
  • unshielded


To the top