Technical data
Performance characteristics
Process temperature
  • -50 … 250 °C , without cooling neck @ Tamb = 20 °C
  • -50 … 400 °C , with cooling neck @ Tamb = 20 °C
  • -50 … 400 °C , with cooling neck and spacer @ Tamb = 60 °C
Pt100 accuracy class (EN 60751)
  • B (± 0.3 °C at 0 °C)
  • ± (0.3 + 0.005 × t)°C
  • A (± 0.15 °C at 0 °C)
  • ± (0.15 + 0.002 × t)°C
  • 1/3 B (± 0.1 °C at 0 °C)
  • ± 1/3 × (0.3 + 0.005 × t)°C
  • 1/6 B (± 0.05 °C at 0 °C)
  • ± 1/6 × (0.3 + 0.005 × t)°C
Process connection
Sensor length
  • 20 … 3000 mm
Sensor tube material
  • AISI 316L (1.4404)
Surface roughness wetted parts
  • Ra ≤ 0.8 µm
Ambient conditions
Degree of protection (EN 60529)
  • IP 67
  • IP 69K , with appropriate cable
Humidity
  • < 98K % RH , condensing
Vibration (sinusoidal) (EN 60068-2-6)
  • 1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
Output signal
Without transmitter
  • Pt100, 4-wire
With transmitter
  • 4 … 20 mA , 2-wire
  • 4 … 20 mA , + HART®
Compliance and approvals
EMC
  • EN 61000-6-2
  • EN 61000-6-3
Explosion protection
  • ATEX II 1G Ex ia IIC T4/T5
  • ATEX II 3G Ex nA II T5

Downloads
Data sheet
Installation and operating instructions
Certificates / approvals
Software
3D CAD

Drawings

Drawings

FlexHousing with rear process connection

(png | 71 KB)

FlexHousing with bottom process connection

(png | 88 KB)

Field housing, Ø55 mm

(png | 73 KB)

Cooling neck

(png | 39 KB)

Without thread (BCID: T65)

(png | 40 KB)

G 1/2 A DIN 3852-E (BCID: G51)

(png | 107 KB)

G 1/2 A DIN 3852-A (BCID: G44)

(png | 104 KB)

R 1/2 ISO 7/1 (BCID: R01)

(png | 97 KB)

1/2-14 NPT (BCID: N02)

(png | 103 KB)

Accessories
Programming tool
Accessories process sensors – FlexProgrammer 9701 FlexProgrammer 9701
Configuration tool for process sensors

Article no.:10260076

  • Operated from a PC, supplied from the USB port
  • Remote operation, supplied from a battery
  • User-friendly software with help menus
  • CleverLevel LBFH / LBFI / LBFS / LFFS / LBFS hanging, CombiPress PFMH / PFMN, FlexTop 2202 / 2203 / 2204 / 2211 / 2221, CombiTemp TFRH / TFRN, CombiLyz AFI4 / AFI5, CombiView DFON, PBMH, PBMH autoclavable, PBMN flush, PBMN low pressure, PBMN high pressure, PBSN, TCR6, TE2, TER8, TFR5
Accessories
Accessories process sensors – ZEX-ALL.B28RD100 ZEX-ALL.B28RD100
Dual-channel safety barrier (with diode return channel)

Article no.:11217062

  • Applicable for all Baumer Ex i 4 … 20 mA current loop sensors and Ex i LBFH/LBFI level switches
  • DIN rail mounted
  • HART compatible
  • Earthed field circuit
Accessories process sensors – ZEX-ALL.B30RS075 ZEX-ALL.B30RS075
Single-Channel safety barrier (for potential-free contacts)

Article no.:11217063

  • Applicable for Baumer DFON relay outputs
  • DIN rail mounted
  • Earthed field circuit
Thermowells – ZPT4 ZPT4

  • R 1/2 ISO 7-1
  • G 1/2 A ISO 228-1
  • G 3/4 A ISO 228-1
  • ISO 2852 (Tri-Clamp), DN 33.7; 38, Ø 50.5
  • M20×1.5 ISO 965

O-Rings – ZPX2-112 – ZPX2-123 – ZPX2-132 – ZPX2-410 – ZPX2-420 – ZPX2-430 – ZPX2-610 – ZPX2-620 – ZPX2-630 – ZPX2-712 – ZPX2-722 – ZPX2-732 ZPX2-410

Article no.:11153808

  • G 1/2 A DIN 3852-E

O-Rings – ZPX2-112 – ZPX2-123 – ZPX2-132 – ZPX2-410 – ZPX2-420 – ZPX2-430 – ZPX2-610 – ZPX2-620 – ZPX2-630 – ZPX2-712 – ZPX2-722 – ZPX2-732 ZPX2-420

Article no.:11153809

  • G 1/2 A DIN 3852-E

O-Rings – ZPX2-112 – ZPX2-123 – ZPX2-132 – ZPX2-410 – ZPX2-420 – ZPX2-430 – ZPX2-610 – ZPX2-620 – ZPX2-630 – ZPX2-712 – ZPX2-722 – ZPX2-732 ZPX2-430

Article no.:11153810

  • G 1/2 A DIN 3852-E

Industrial weld-in sleeves – ZPW1-723 ZPW1-723

Article no.:11177268

  • Welding connection Ø 26.5 x 15


To the top