Technische Daten
Technische Daten - elektrisch
Betriebsspannung
  • Mit DSL.R: 15...30 VDC
  • Mit DSL.E: 9...30 VDC
Betriebsstrom ohne Last
  • ≤200 mA
Störfestigkeit
  • EN 61000-6-2
Störaussendung
  • EN 61000-6-3
Technische Daten - elektrisch (Drehgeber)
Impulse pro Umdrehung
  • 512 … 4096
Phasenverschiebung
  • 90 ° ±20°
Tastverhältnis
  • 40…60 %
Referenzsignal
  • Nullimpuls, Breite 90°
Ausgabefrequenz
  • ≤120 kHz
Ausgangssignale
  • K1, K2, K0 + invertierte
Ausgangsstufen
  • HTL, TTL/RS422
Technische Daten - elektrisch (Drehzahlschalter)
Schnittstelle
  • RS485
Schaltgenauigkeit
  • ± 2 % (oder Digit)
Schaltausgänge
  • Mit DSL.R: 3 Ausgänge, drehzahlgesteuert
  • Mit DSL.E: 2 Ausgänge, drehzahlgesteuert und 1 Kontrollausgang
Ausgangsschaltleistung
  • Mit DSL.R: 12 VDC; ≤40 mA
  • Mit DSL.E: 5...230 VAC/VDC; 5...250 mA
  • (EAC: <50 VAC / 75 VDC)
Schaltverzögerung
  • ≤40 ms
Technische Daten - mechanisch
Baugrösse (Flansch)
  • ø165 mm
Wellenart
  • ø25 mm (durchgehende Hohlwelle)
Zulässige Wellenbelastung
  • ≤500 N axial
  • ≤650 N radial
Schutzart EN 60529
  • IP 67
Drehzahl (n)
  • ≤6000 U/min
Schaltdrehzahlbereich (ns)
  • Impulszahl = 512: ±16...6000 U/min
  • Impulszahl = 1024: ±8...6000 U/min
  • Impulszahl = 2000: ±5...3600 U/min
  • Impulszahl = 2048: ±4...3500 U/min
  • Impulszahl = 2500: ±3...2900 U/min
  • Impulszahl = 4096: ±3...1750 U/min
Betriebsdrehmoment
  • ≤15 Ncm
Trägheitsmoment Rotor
  • 4,9 kgcm²
Werkstoff
  • Gehäuse: Aluminium
  • Welle: Edelstahl
Betriebstemperatur
  • -30...+85 °C
Widerstandsfähigkeit
  • IEC 60068-2-6
  • Vibration 20 g, 10-2000 Hz
  • IEC 60068-2-27
  • Schock 300 g, 6 ms
Korrosionsschutz
  • IEC 60068-2-52 Salzsprühnebel
  • für Umgebungsbedingungen CX (C5-M) nach ISO 12944-2
Explosionsschutz
  • II 3 G Ex ec IIC T4 Gc (Gas)
  • II 3 D Ex tc IIIC T135°C Dc (Staub)
  • (nur bei Option ATEX)
Anschluss
  • Klemmenkasten
Masse ca.
  • 4,2 kg
Zulassung
  • CE

Downloads
Datenblatt
Betriebsanleitung
Softwarehandbuch
Konformitätserklärungen
Software

Accessories
Mounting accessories
Torque arm M12, length 145...170 mm

Article no.: 11054922

  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 145...170 mm
Torque arm M12, length 180...205 mm

Article no.: 11054921

  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 180...205 mm
Torque arm M12, length 480...540 mm (≥200 mm)

Article no.: 11072741

  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 480...540 mm
  • Can be shortened to ≥200 mm
Torque arm M12 insulated, length 145...170 mm

Article no.: 11054924

  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 145...170 mm
Torque arm M12 insulated, length 480...540 mm (≥200 mm)

Article no.: 11072723

  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 480...540 mm
  • Can be shortened to ≥200 mm
Mounting kit for torque arm size M12 and an earthing strap

Article no.: 11069336

Mounting kit for fixing a torque arm size M12 and an earthing strap.

Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

USB → RS485 converter

Article no.: 11064248

  • USB 2.0 to RS485 converter for Laptop and PC
  • USB 1.1 and 2.0 compatibility
  • Supports two-wire RS485 read/write operation
  • Power supply via USB
USB → RS485 converter with connecting cable for DSL

Article no.: 11117345

  • Connecting cable for DSL-RS485 interface
  • USB 2.0 to RS485 converter for Laptop and PC
  • USB 1.1 and 2.0 compatibility
  • Supports two-wire RS485 read/write operation
  • Power supply via USB
Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

To the top