Gamme de produits
Capteur dans un boîtier métallique

Capteur dans un boîtier métallique

  • Capteurs cylindriques (Ø12 à 30 mm) et rectangulaires (20 mm)
  • Montage encastré
  • Sensibilité configurable Variantes avec point de commutation défini par défaut
  • Distance de commutation jusqu'à 15 mm
Open in product selector
Capteurs dans un boîtier plastique

Capteurs dans un boîtier plastique

  • Capteurs cylindriques (Ø 12 à 30 mm) et rectangulaires (30 mm)
  • Montage affleurant /non- affleurant
  • Sensibilité configurable
  • Variantes avec point de commutation défini par défaut
  • Distance de commutation jusqu'à 30 mm
Open in product selector
Non-contact – Particularly flat design

Designs particulièrement plats

  • 52,4 × 25 × 6 mm
  • Montage affleurant
  • Installation flexible et facile avec cadre de montage unique
  • Option d’un montage en cascade de plusieurs capteurs
  • Distance de commutation jusqu'à 15 mm
Open in product selector

Your benefits
  • Outstanding longevity and high process safety by non-contact sensing principle
    • Switching distance up to 30 mm and particularly flat design enable installation in a protected position and close to the process
  • Reliable detection of many different object materials
    • Independent of color, gloss or  surface properties
    • Insensitive to dust and dirt
    • Sensors with flush installation are especially recommended for non-conductive (dielectric) media
    • Designs for non-flush installation are ideal for detecting conductive media and filling levels

Applications

Technology
Capacitive sensors – Technology

The capacitive sensor basically functions like an open capacitor. An electrical field is formed between the measuring electrode and the GND electrode. If a material with a dielectric constant εr greater than air enters the electrical field,  the capacity of the field increases depending on the εr of this material. The electronics measure this capacity increase, the generated signal is conditioned during subsequent signal processing and causes output switching at a corresponding magnitude.

Flush-mountable and non-flush mounting procedure
Flush mounting of flush-mountable capacitive sensors is possible in all materials. The minimum distance between the sensors must be observed. For non-flush mountable capacitive sensors, a free zone must be created around the sensor head which must not contain any damping material.


Téléchargements
Rapports d’utilisation et d’application / Livres blancs


Au sommet