USA
us
English
Technical data
Technical data - electrical ratings
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Approval
- CE
- UL approval / E217823
Technical data - electrical ratings (square-wave)
- Voltage supply
- 4.5...30 VDC
- Consumption w/o load
- ≤300 mA
- Pulses per revolution
- 1 … 524288
- Phase shift
- 90 ° ±10°
- Duty cycle
- 40…60 %
- Sensing method
- Magnetic
- Output frequency
- ≤2 MHz
- Output signals
- A+, A-, B+, B-
- Output stages
- HTL
- TTL/RS422
Technical data - electrical ratings (SinCos)
- Voltage supply
- 4.5...30 VDC
- Consumption w/o load
- ≤300 mA
- Sinewave cycles per revolution
- 1 … 32768
- Phase shift
- 90 ° ±5°
- Sensing method
- Magnetic
- Output signals
- A+, A-, B+, B-
- Output stages
- SinCos 1 Vpp
- Difference of SinCos amplitude
- ≤20 mV
- Harmonics typ.
- -40 dB
- DC offset
- ≤20 mV
- Bandwidth
- 400 kHz (-3 dB)
Technical data - electrical ratings (SSI)
- Voltage supply
- 4.5...30 VDC
- Interface
- SSI
- Function
- Singleturn
- Steps per revolution
- ≤131072 / 17 bit
- Sensing method
- Magnetic
- Code
- Gray or binary
- Code sequence
- CW default
- Additional outputs
- Square-wave TTL (RS422)
- Square-wave universal HTL/TTL
- SinCos
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
Technical data - mechanical design
- Sensor head
- FPGA signal processing
- Size (flange)
- ø406.8 mm
- Shaft type
- ø70...340 mm (through hollow shaft)
- Axial tolerance
- ±1 mm (wheel/head)
- Radial tolerance
- 0.1…0.5 mm (wheel/head)
- Protection EN 60529
- IP 67 (head)
- IP 68 (wheel)
- Operating speed
- ≤2000 rpm
- Material
- Housing sensing head: aluminium alloy
- Wheel: stainless steel (1.4104)
- Operating temperature
- -20...+85 °C
- Resistance
- IEC 60068-2-6
- Vibration 30 g, 55-2000 Hz
- IEC 60068-2-27
- Shock 300 g, 2 ms
- Accuracy of magnetic measure
- ±150 ″
- Connection
- Flange connector M23, 17-pin
Downloads
Data sheet
-
MHAP 400 - HDmag
-
MHAP 400 - HDmag
-
MHAP 400 - HDmag
Operating Manual
-
MHAP 400 - HDmag
Certificates / approvals
-
Shock and vibration certificate MHAP
-
Shock and vibration certificate MHAP
-
Protection certificate MHAP
-
Protection certificate MHAP
Declaration of conformity
-
DoC / CoC - LMAX, MHAx, MHGx, MHG, MQR3000F, MIR3000F, MQR350A, MIR350A
3D CAD / CAE
-
MHAP400 B5 G180 / STEP
-
MHAP400 B5 G340 / STEP