2. Product Overview
  3. Rotary encoders / angle sensors
  4. Industrial encoders absolute
  5. 58 mm compact
Product portfolio
58 mm – clamping flange

58 mm – clamping flange

OptoTurn EAL580-SC

  • Solid shaft 10 mm (clamping flange)
  • PROFINET, EtherCAT, EtherNet/IP, OPC UA (upon request)
  • Future-proof for Industry 4.0 and IIoT
Open in product selector

58 mm – synchro flange

OptoTurn EAL580-SV

  • Solid shaft 6 mm (synchro flange)
  • PROFINET, EtherCAT, EtherNet/IP, OPC UA (upon demand)
  • Future-proof for Industry 4.0 and IIoT
Open in product selector

58 mm – blind hollow shaft

OptoTurn EAL580-B

  • Blind hollow shaft 10...15 mm
  • PROFINET, EtherCAT, EtherNet/IP, OPC UA (upon request)
  • Future-proof for Industry 4.0 and IIoT
Open in product selector
58 mm – through hollow shaft

58 mm – through hollow shaft

OptoTurn EAL580-T

  • Through hollow shaft 12 ... 14 mm

  • PROFINET, EtherCAT, EtherNet/IP, OPC UA (upon request)

  • Future-proof for Industry 4.0 and IIoT
Open in product selector
Video "Absolute industrial encoders – more communicative, more compact"
 

With an installation depth of only 47 mm, absolute encoders of the series OptoTurn EAL580 are extremely compact and offer maximum space for the construction.

Your benefits
  • Unrivalled compact and space saving
    • Ethernet encoder with the smallest installation depth in the 58 mm class: a mere 47 mm
  • Cost-efficient and lean cabling
    • The radial connector outlet allows the use of straight connectors and avoids tight and trouble-prone bending radius
  • Easy integration at every spot
    • Only ethernet encoder on the market with through hollow shaft allows for direct integration into the drive train
  • Increased system availability
    • Supports Media Redundancy Protocol (MRP) for compensation of connection fails in a ring topology
  • Reduced downtimes
    • Supports Simple Device Replacement, easy replacement of identical device due to neighbourhood detection
  • Oriented towards the future: Industry 4.0 – IIoT ready
    • Access to parameters and additional information over PROFINET & OPC UA, Cloud Service compatible for optimization of processes like e.g. preventive maintenance
Applications

High-precision and fast detection of positions and speed

  • Packaging
  • Medical industry
  • Handling and mounting systems
  • Wood, plastic or metal processing
  • Production and processing of paper and board
  • Printing industry
Technology
PROFINET – for maximum availability

PROFINET – for maximum availability

  • Increased machine and plant availability through Media Redundancy Protocol (MRP): In the event of line or switch failure in ring topology, the system continues to run fault-free. Only a warning message appears.
  • No pre-configuration before device replacement due to Link Layer Discovery Protocol (LLDP): In hard use, even the best devices can fail once. To enable a time-saving replacement, the OptoTurn EAL580 uses neighborhood recognition via LLDP. The same devices can be replaced at any time without pre-configuration.
  • Support of real-time (RT) and isochronous real-time (IRT) operating modes: The OptoTurn EAL580 always works according to the requirements of the application.
EtherCAT – for extremely fast and precise applications

EtherCAT – for extremely fast and precise applications

  • Simple and intuitive commissioning: The device address is conveniently assigned e.g. using the TwinCAT commissioning software. Firmware updates of the encoder are controlled via the protocol file access over EtherCAT (FoE).
  • Minimum cycle time (62.5 μs) and low jitter: For demanding applications and high precision control of the machine in real-time.
  • Support of the operating modes Free Run, Synchronous Mode and Distributed Clocks. The OptoTurn EAL580 always adapts to the requirements of the respective application. Regardless of whether the values are freely determined or provided in a highly synchronous manner.

 

EtherNet/IP – for universal data access

EtherNet/IP – for universal data access

  • Increased plant availability through Device Level Ring (DLR): In the case of an interruption in a plant network in ring topology, the OptoTurn EAL580 ensures that the encoder data are still sent to the control.
  • Integrated web server for process data access from the office network via control to the rotary encoder: Storage and analysis on any server or in the cloud. Access management and the highest security are ensured by the control system.
Downloads
Brochures / Catalogs

To the top