Technical data
Technical data - electrical ratings
Voltage supply
  • 5 VDC ±5 %
  • 8...30 VDC
  • 4.75...30 VDC
Reverse polarity protection
  • Yes
Short-circuit proof
  • Yes (HTL)
  • Yes (TTL, max. 1 s and 1 signal)
Consumption w/o load
  • ≤70 mA
Pulses per revolution
  • 100 … 5000
Phase shift
  • 90 ° ±10°
Duty cycle
  • 40…60 %
Reference signal
  • Zero pulse, width 90° ±10 %
Sensing method
  • Optical
Output frequency
  • ≤300 kHz (TTL)
  • ≤160 kHz (HTL)
Output signals
  • A+, B+, R+, A-, B-, R-
Output stages
  • TTL/RS422
  • HTL/push-pull
Interference immunity
  • DIN EN 61000-6-2
Emitted interference
  • DIN EN 61000-6-3
Approval
  • UL 508 / CSA 22.2
Technical data - mechanical design
Size (flange)
  • ø115 mm
Shaft type
  • ø11 x 30  mm solid shaft with woodruff key
Admitted shaft load
  • ≤40 N axial
  • ≤N radial
Protection DIN EN 60529
  • IP 65 (without shaft seal)
  • IP 67 (with shaft seal)
Operating speed
  • ≤6000 rpm (+20 °C, IP 67)
  • ≤12000 rpm (+20 °C, IP 65)
Starting torque
  • ≤0,015 Nm (+20 °C, IP 65)
  • ≤0,02 Nm (+20 °C, IP 67)
Material
  • Housing: aluminium die-cast
  • Flange: aluminium
  • Solid shaft: stainless steel
Operating temperature
  • -40...+85 °C
Relative humidity
  • 90 % non-condensing
Resistance
  • DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
  • DIN EN 60068-2-27 Shock 300 g, 6 ms
Connection
  • Flange connector M12, 8-pin
  • Flange connector M23, 12-pin
  • Cable
Weight approx.
  • 485 g

Downloads
Data sheet
3D CAD data
  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, cable axial, IP65 / STEP (EIL580-S1B1.5Tx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, cable axial, IP67 / STEP (EIL580-S1B1.7Tx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, cable radial, IP65 / STEP (EIL580-S1B1.5Rx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, cable radial, IP67 / STEP (EIL580-S1B1.7Rx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, cable tangential, IP65 / STEP (EIL580-S1B1.5Px.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, cable tangential, IP67 / STEP (EIL580-S1B1.7Px.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M12 axial, IP65 / STEP (EIL580-S1B1.5Ax.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M12 axial, IP67 / STEP (EIL580-S1B1.7Ax.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M12 radial, IP65 / STEP (EIL580-S1B1.5Bx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M12 radial, IP67 / STEP (EIL580-S1B1.7Bx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M23 axial, IP65 / STEP (EIL580-S1B1.5Dx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M23 axial, IP67 / STEP (EIL580-S1B1.7Dx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M23 radial, IP65 / STEP (EIL580-S1B1.5Fx.xxxxx.A)

  • EIL580-S1B1: EURO flange B10, solid shaft ø11x30 mm with woodruff key, connector M23 radial, IP67 / STEP (EIL580-S1B1.7Fx.xxxxx.A)

Certificates/licenses
Declarations of conformity
  • Incremental encoders EIL580-, HS35-, ITD2x-, ITD3-, ITD4x-, ITD6x-, ITD70-, TIL- series and ITD- combination


Drawings

Dimensions


Accessories
Mounting accessories
K 35

  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible

K 50

  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible

K 60

  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible


To the top