2. Product Overview
  3. Rotary encoders / angle sensors
  4. Industrial encoders absolute
  5. 58 mm compact
  6. EAL580-SV
  7. EAL580-SV - EtherCAT
Caractéristiques techniques
Caractéristiques électriques
Voltage supply
  • 10...30 VDC
Reverse polarity protection
  • Yes
Consumption w/o load
  • ≤100 mA (24 VDC)
Interface
  • EtherCAT
Function
  • Multiturn
Steps per revolution
  • ≤262144 / 18 bit (adjustable)
Number of revolutions
  • ≤65536 / 16 bit (adjustable)
Total resolution
  • ≤ 31 bit
Précision absolue
  • ±0,01 ° (ST 18 bits / MT 13 bits)
  • ±0,025 ° (ST 13 bits / MT 16 bits)
Principe de détection
  • Optique
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-4
LED Diagnostic
  • 4x LED dans le boîtier
Certificat
  • Certification UL/E63076
Caractéristiques mécaniques
Taille (bride)
  • ø58 mm
Type d’axe
  • ø6 x 10 mm, axe avec méplat
Bride
  • Bride synchro
Protection EN 60529
  • IP 54
  • IP 65
  • IP 67
Vitesse de rotation
  • ≤10000 t/min (mécanique)
  • ≤6000 t/min (electrique)
Accélération
  • ≤1000 U/s²
Couple de démarrage 
  • ≤0,03 Nm (+25 °C, IP 65/IP 67)
  • ≤0,015 Nm (+25 °C, IP 54)
Moment d'inertie rotor
  • 20 gcm²
Charge
  • ≤20 N axiale
  • ≤40 N radiale
Matière
  • Boîtier: zinc coulé sous pression
  • Bride: aluminium
Température d'utilisation
  • -40...+85 °C (Voir remarques générales)
Humidité relative
  • 95 % sans condensation
Résistance
  • EN 60068-2-6
  • Vibrations ±0,75 mm - 10-58 Hz 10 g - 58-2000 Hz
  • EN 60068-2-27
  • Choc 100 g, 2 ms
Poids
  • 500 g
Raccordement
  • Embase mâle 3 x M12
Downloads
Data sheet
Quickstart
Software Manual
Certificates / approvals
Brochures / Catalogs
Declaration of conformity
Software
3D CAD / CAE

Drawings
Drawings
The selected altAttribute does not exist!

(png | 137 KB)
Accessories
Mounting accessories
Mounting solid shaft encoders – Eccentric fixing, single (Z 119.006) Eccentric fixing, single (Z 119.006)

Article no.: 10117669
  • For encoders with suitable groove
The selected altAttribute does not exist! Mounting adaptor for encoders with synchro flange

Article no.: 10117667
  • Glass-fiber reinforced plastic
  • excellent resistance against temperature and chemicals
  • Electrically isolated encoder mount
Mounting solid shaft encoders – Bearing flange for encoders with synchro flange (Z 119.035) – Bearing flange for encoders with synchro flange (Z 119.035) Bearing flange for encoders with synchro flange (Z 119.035)

Article no.: 10158124
  • For all encoder with synchro flange and 6 mm shaft
  • Material: Aluminium, bare
Self-tapping grounding screw (Z 119.100) Self-tapping grounding screw (Z 119.100)

Article no.: 11177167
  • Self-tapping grounding screw
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=10)
For encoder with solid shaft

Article no.: 10141132
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=6)
For encoder with solid shaft

Article no.: 10141131
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Slit coupling (D1=06 / D2=06)
For encoder with solid shaft

Article no.: 11034143
  • Backlash-free and angularly synchronous transmission of rotary motion
  • Medium torsional spring stiffness
  • Small restoring forces
  • Electrically isolating
  • Vibration damping
Connectors and cables
Cables / connectors – Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05) – Cable connector M12, 4-pin, on both sides, D-coded, 1 m cable (Z 185.E01) – Cable connector M12, 4-pin, on both sides, D-coded, 2 m cable (Z 185.E02) – Cable connector M12, 4-pin, on both sides, D-coded, 10 m cable (Z 185.E10) Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05)

Article no.: 11034355
  • Cable connector M12, 4-pin, for EtherNet encoder
  • With shielded cable
  • Cable for flexible cable carriers
  • Protection IP 67
Cables / connectors – Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01) Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01)

Article no.: 11174046
  • For cable diameter 4...8 mm
  • Ready-made connector
Cables / connectors – Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02) Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02)

Article no.: 11174047
  • For cable diameter 4...8 mm
  • Ready-made connector
Cables / connectors – Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05) – Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10) Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05)

Article no.: 11034356
  • Female connector M12 with screwable nut
  • With cable (shielded) in different lengths
Cables / connectors – Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05) – Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10) Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10)

Article no.: 11212237
  • Female connector M12 with screwable nut
  • With cable (shielded) in different lengths
To the top