2. Apercu des produits
  3. Codeurs / Capteurs angulaires
  4. Codeur offshore
  5. POG 83
  6. POG 83 DNV-GL
  7. POG 83 - DNV GL
Caractéristiques techniques
Caractéristiques électriques
Alimentation
  • 7...24 VDC
Courant de service à vide
  • ≤70 mA
Impulsions par tour
  • 512 … 4096
Mode de déphasage
  • 90 ° ±10°
Période
  • 40…60 %
Signal de référence
  • Top zéro, largeur 90°
Principe de détection
  • Optique
Fréquence de sortie
  • ≤160 kHz
Signaux de sortie
  • A+, A-, B+, B-, R+, R-
Etage de sortie
  • HTL/Push-pull
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Certificat
  • CE
  • Certification UL/E217823
  • DNV GL
Classes de localisation DNV GL
  • Température: D
  • Humidité: B
  • Vibration: B
  • EMV: B
  • Protection boîtier: C
Caractéristiques mécaniques
Taille (bride)
  • ø115 mm
Type d’axe
  • ø11 mm axe
Charge
  • ≤250 N axiale
  • ≤350 N radiale
Bride
  • Bride EURO B10
Protection EN 60529
  • IP 66
Vitesse de rotation
  • ≤6000 t/min (mécanique)
Couple en fonctionn. typ.
  • 6,5 Ncm
Moment d'inertie rotor
  • 450 gcm²
Matière
  • Boîtier: inox
  • Axe: inox
Température d'utilisation
  • -40...+85 °C
Résistance
  • IEC 60068-2-6
  • Vibrations 20 g, 10-2000 Hz
  • IEC 60068-2-27
  • Choc 300 g, 1 ms
Protection contre la corrosion
  • IEC 60068-2-52 brouilla. salins
  • pour les conditions ambiantes CX (C5-M) selon ISO 12944-2
Raccordement
  • Embase mâle M23
Poids
  • 3,5 kg
Downloads
Fiche technique
Instructions d'utilisation
Certifications / Approbations
Declaration of conformity
3D CAD / CAE

Accessories
Mounting accessories
Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 60 (shaft ø11...22 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible
Connectors and cables
Mating connector M23, solder version, 12-pin, CW

Article no.: 11068549

Mating connector M23 in solder version (12-pin, female , CW) for cable connection to the flange connector M23 (12-pin, male , CCW).
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
To the top