2. Vista general de productos
  3. Medición de distancias
  4. Sensores de distancia por ultrasonidos
  5. Off-highway ultrasonic
  6. UF401V
  7. UF401V.DA0-UA1Z.82Y
Datos técnicos
Datos generales
Scanning range Sd
  • 100 … 1000 mm (nominal)
Scanning range close limit Sdc
  • 100 mm
Scanning range far limit Sde
  • 1000 mm
Repeat accuracy
  • < 0,5 mm (typical)
  • < 1 mm at 1000 mm
Resolution
  • < 0,3 mm
  • < 0,9 mm at 1000 mm
Response time ton/toff
  • < 40 ms
Delay time
  • < 20 ms (for targets moving with a speed of less than 2 m/s)
Temperature drift
  • < 2 % of distance to target So
Power-up drift
  • Compensated after 15 min.
Sonic frequency
  • 205 ... 235 kHz
Approvals/certificates
  • EN ISO 14982:2009 1) 2)
  • EN 13309:2010 1) 3)
  • ISO 13766:2006 1)
  • EN 61000-6-2
  • EN 61000-6-3
Datos eléctricos
Voltage supply range +Vs
  • 9 … 27 VDC (12 VDC nominal system voltage)
Current consumption max. (no load)
  • 35 mA
Output type
  • Analog voltage output
Output (Uout)
  • 0,5 … 4,5 V DC
Uout at Sdc
  • 0,4 … 0,6 V DC , nominal
Uout at Sde
  • 4,4 … 4,6 V DC , nominal
Uout at object too close
  • 0,4 … 0,6 V DC
Uout at object out of range
  • 4,4 … 4,6 V DC
Uout at sensor error
  • < 0,25 V
Maximum output current
  • ≤ 10 mA
Short circuit protection
  • Yes
Reverse polarity protection
  • Yes
Datos mecánicos
Type
  • Flange mount with M6 mounting holes (6.6 mm +/- 0.1 mm)
Housing material
  • PA (glass fiber reinforced, with aluminium inserts)
Recommended mounting screws
  • MBN 10105 steel 8.8/10.9 M6 x 1 (Hexagon head screws with flange)
Installation torque
  • 8 … 10 Nm
Weight
  • 40 g
Connection types
  • AMPSEAL 16, 3 pin
Mating connector housing
  • TE part #776429-1
Mating connector receptacles
  • TE part #1924464-1
Condiciones ambientales
Operating temperature
  • -25 … +70 °C
Storage temperature
  • -40 … +85 °C
Altitude
  • < 2000 m
B10 life
  • 10 000 h / 90 % confidence
Protection class
  • ISO 20653:2013 (IP 68/69K (50bar))
Random vibration
  • IEC 60068-2-64 (10 Hz ... 2000 Hz, 2.68 Grms)
Operating Mechanical Shock
  • IEC 60068-2-27 (50 g)
Modelo 3D
Modelo 3D

La creación de modelos CAD requiere un registro externo en CADENAS.

Descargas
Data sheet
Quickstart
Certificates / approvals

Diagramas
Typical sonic cone profile
The selected altAttribute does not exist!

(png | 158 KB)
Dibujos
Drawings
The selected altAttribute does not exist!

(png | 38 KB)
Connection diagram
The selected altAttribute does not exist!

(png | 46 KB)
Pin assignment
The selected altAttribute does not exist!

(png | 71 KB)
Hasta la cima