2. Apercu des produits
  3. Codeurs / Capteurs angulaires
  4. Combinaisons HeavyDuty
  5. Codeur incrémental avec commutateur de vitesse
  6. HOG 16 + DSL
Caractéristiques techniques
Caractéristiques électriques
Alimentation
  • Avec DSL.R: 15...30 VDC
  • Avec DSL.E: 9...30 VDC
Courant de service à vide
  • ≤200 mA
Principe de détection
  • Optique
Certificat
  • CE
Caractéristiques électriques (codeur)
Impulsions par tour
  • 512 … 2500
Mode de déphasage
  • 90 ° ±20°
Période
  • 40…60 %
Signal de référence
  • Top zéro, largeur 90°
Fréquence de sortie
  • ≤120 kHz
Signaux de sortie
  • K1, K2, K0 + compléments
Etage de sortie
  • HTL
  • TTL/RS422
Caractéristiques électriques (Commutateur de vitesse)
Interface
  • RS485
Précision de commutation
  • ± 2 % (ou Digit)
Sorties de commutation
  • Avec DSL.R: 3 sorties, réglage en vitesse
  • Avec DSL.E: 2 sorties, réglage en vitesse et 1 sortie de contrôle
Puissance de commutation
  • Avec DSL.R: 12 VDC; ≤40 mA
  • Avec DSL.E: 5...230 VAC/VDC; 5...250 mA
  • (EAC: <50 VAC / 75 VDC)
Retardement à la commut.
  • ≤40 ms
Caractéristiques mécaniques
Taille (bride)
  • ø158 mm
Type d’axe
  • ø20...50 mm (traversant)
Charge
  • ≤450 N axiale
  • ≤600 N radiale
Protection EN 60529
  • IP 66
Vitesse (n)
  • ≤6000 t/min
Plage de vitesses de commutation (ns)
  • Impulsions = 512: ±16...6000 t/min
  • Impulsions = 1024: ±8...6000 t/min
  • Impulsions = 2000: ±5...3600 t/min
  • Impulsions = 2048: ±4...3500 t/min
  • Impulsions = 2500: ±3...2900 t/min
Couple en fonctionnement
  • ≤15 Ncm
Moment d'inertie rotor
  • 4,9 kgcm²
Matière
  • Boîtier: aluminium
  • Axe: inox
Température d'utilisation
  • -20...+85 °C
Résistance
  • IEC 60068-2-6
  • Vibrations 15 g, 10-2000 Hz
  • IEC 60068-2-27
  • Choc 300 g, 6 ms
Protection contre la corrosion
  • IEC 60068-2-52 brouilla. salins
  • pour les conditions ambiantes C4 selon ISO 12944-2
Raccordement
  • 2x boîte à bornes
  • 3x boîte à bornes (avec option M)
Poids
  • 4 kg
  • 5 kg (avec option M)
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Certificat
  • CE
Downloads
Fiche technique
Instructions d'utilisation
Instructions du logiciel
Declaration of conformity
Software

Accessories
Mounting accessories
Torque arm M12, length 145...170 mm

Article no.: 11054922
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 145...170 mm
Torque arm M12, length 180...205 mm

Article no.: 11054921
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 180...205 mm
Torque arm M12, length 480...540 mm (≥200 mm)

Article no.: 11072741
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 480...540 mm
  • Can be shortened to ≥200 mm
Torque arm M12 insulated, length 145...170 mm

Article no.: 11054924
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 145...170 mm
Torque arm M12 insulated, length 480...540 mm (≥200 mm)

Article no.: 11072723
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 480...540 mm
  • Can be shortened to ≥200 mm
Mounting kit for torque arm size M12 and an earthing strap

Article no.: 11069336

Mounting kit for fixing a torque arm size M12 and an earthing strap.
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
USB → RS485 converter

Article no.: 11064248
  • USB 2.0 to RS485 converter for Laptop and PC
  • USB 1.1 and 2.0 compatibility
  • Supports two-wire RS485 read/write operation
  • Power supply via USB
USB → RS485 converter with connecting cable for DSL

Article no.: 11117345
  • Connecting cable for DSL-RS485 interface
  • USB 2.0 to RS485 converter for Laptop and PC
  • USB 1.1 and 2.0 compatibility
  • Supports two-wire RS485 read/write operation
  • Power supply via USB
Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
To the top