2. Product Overview
  3. Rotary encoders / angle sensors
  4. Codeurs absolus industriels
  5. 58 mm compact
  6. EAL580-B
  7. EAL580-B - EtherNet/IP
Caractéristiques techniques
Caractéristiques électriques
Alimentation
  • 10...30 VDC
Protection contre l'inversion de polarité
  • Oui
Courant de service à vide
  • ≤100 mA (24 VDC)
Interface
  • EtherNet/IP
Fonction
  • Multitour
Nombre de pas par tour
  • ≤262144 / 18 bits (ajustable)
Nombre de tours
  • ≤65536 / 16 bits (ajustable)
Résolution totale
  • ≤ 31 bits
Précision absolue
  • ±0,01 ° (ST 18 bits / MT 13 bits)
  • ±0,025 ° (ST 13 bits / MT 16 bits)
Principe de détection
  • Optique
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-4
LED Diagnostic
  • 4x LED dans le boîtier
Certificat
  • Certification UL/E63076
Caractéristiques mécaniques
Taille (bride)
  • ø58 mm
Type d’axe
  • ø10...15 mm (non traversant)
Protection EN 60529
  • IP 54
  • IP 65
  • IP 67
Vitesse de rotation
  • ≤6000 t/min (mécanique)
  • ≤6000 t/min (electrique)
Accélération
  • ≤1000 U/s²
Couple de démarrage 
  • ≤0,04 Nm (+25 °C, IP 54)
Moment d'inertie rotor
  • 20 gcm²
Matière
  • Boîtier: zinc coulé sous pression
  • Bride: aluminium
Température d'utilisation
  • -40...+85 °C (Voir remarques générales)
Humidité relative
  • 95 % sans condensation
Résistance
  • EN 60068-2-6
  • Vibrations ±0,75 mm - 10-58 Hz 10 g - 58-2000 Hz
  • EN 60068-2-27
  • Choc 100 g, 2 ms
Poids
  • 500 g
Raccordement
  • Embase mâle 3 x M12
Downloads
Fiche technique
Guide rapide
Instructions du logiciel
Certificates / approvals
Brochures / Catalogs
Declaration of conformity
Software
3D CAD / CAE

Drawings
Drawings
The selected altAttribute does not exist!

(png | 154 KB)
Accessories
Mounting accessories
Mounting hollow shaft encoders – Torque support by rubber buffer for encoders with 15 mm pin (Z 119.041) Torque support by rubber buffer for encoders with 15 mm pin (Z 119.041)

Article no.: 10139345
  • Easy and cost-effective mounting
  • For applications with high acceleration
Mounting kit 056

Article no.: 11066120
  • For low-dynamic applications and constant movements
Mounting hollow shaft encoders – Spring coupling for encoders with ø58 mm housing, hole distance 68 mm (Z 119.073) – Spring coupling for encoders with ø58 mm housing, hole distance 73 mm (Z 119.072) Spring coupling for encoders with ø58 mm housing, hole distance 73 mm (Z 119.072)

Article no.: 10165157
  • For high-dynamic applications and high demand on accuracy
Mounting hollow shaft encoders – Spring coupling for encoders with ø58 mm housing, hole distance 68 mm (Z 119.073) – Spring coupling for encoders with ø58 mm housing, hole distance 73 mm (Z 119.072) Spring coupling for encoders with ø58 mm housing, hole distance 68 mm (Z 119.073)

Article no.: 11034121
  • For high-dynamic applications and high demand on accuracy
Mounting hollow shaft encoders – Spring coupling for one-side attachment, length 115 mm (Z 119.076) Spring coupling for one-side attachment, length 115 mm (Z 119.076)

Article no.: 11034123
  • Several graduated circle options for mounting on the intended surface
  • For low-dynamic applications
Mounting hollow shaft encoders – Spring coupling for encoders with ø58 mm housing, hole distance 63 mm (Z 119.082) Spring coupling for encoders with ø58 mm housing, hole distance 63 mm (Z 119.082)

Article no.: 11003562
  • For high-dynamic applications and high demand on accuracy
Self-tapping grounding screw (Z 119.100) Self-tapping grounding screw (Z 119.100)

Article no.: 11177167
  • Self-tapping grounding screw
Connectors and cables
Cables / connectors – Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05) – Cable connector M12, 4-pin, on both sides, D-coded, 1 m cable (Z 185.E01) – Cable connector M12, 4-pin, on both sides, D-coded, 2 m cable (Z 185.E02) – Cable connector M12, 4-pin, on both sides, D-coded, 10 m cable (Z 185.E10) Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05)

Article no.: 11034355
  • Cable connector M12, 4-pin, for EtherNet encoder
  • With shielded cable
  • Cable for flexible cable carriers
  • Protection IP 67
Cables / connectors – Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01) Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01)

Article no.: 11174046
  • For cable diameter 4...8 mm
  • Ready-made connector
Cables / connectors – Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02) Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02)

Article no.: 11174047
  • For cable diameter 4...8 mm
  • Ready-made connector
Cables / connectors – Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05) – Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10) Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05)

Article no.: 11034356
  • Female connector M12 with screwable nut
  • With cable (shielded) in different lengths
Cables / connectors – Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05) – Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10) Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10)

Article no.: 11212237
  • Female connector M12 with screwable nut
  • With cable (shielded) in different lengths
To the top