Datos técnicos
Datos técnicos: valores eléctricos nominales
- Voltage supply
- 4.5…30 VDC (SSI, SSI + TTL/RS422)
- 5.5…30 VDC (SSI + HTL/Push-pull)
- Consumption typ.
- 60 mA (5 VDC, w/o load)
- 20 mA (24 VDC, w/o load)
- Initializing time
- ≤ 170 ms after power on
- Data currency
- Typ. 2 µs (cyclic request)
- Interface
- SSI
- SSI + incremental
- Function
- Multiturn
- Singleturn
- Operating mode
- Linear feedback shift register (on request)
- Steps per revolution
- ≤16384 / 14 bit
- Number of revolutions
- ≤262144 / 18 bit
- Absolute accuracy
- ±0,15 ° (+20 ±15 °C)
- ±0,25 ° (-40...+85 °C)
- Sensing method
- Magnetic
- Code
- Gray or binary
- Code sequence
- CW: ascending values with clockwise sense of rotation; looking at flange
- Inputs
- SSI clock: Linereceiver RS422
- Zero setting input
- Counting direction
- Output stages
- SSI data: Linedriver RS422
- Incremental: linedriver RS422 or push-pull (option)
- Incremental output
- 1024, 2048, 4096 ppr (other on request)
- Output signals
- A+, A-, B+, B-
- Output frequency
- ≤350 kHz
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-4
- Diagnostic function
- DATAVALID (on request)
- Approval
- UL approval / E217823
Datos técnicos: diseño mecánico
- Size (flange)
- ø58 mm
- Shaft type
- ø10 x 20 mm, solid shaft with flat
- Flange
- Clamping flange
- Protection EN 60529
- IP 65 (without shaft seal)
- IP 67 (with shaft seal)
- Operating speed
- ≤6000 rpm
- Starting torque
- ≤2 Ncm (+20 °C, IP 65)
- ≤2,5 Ncm (+20 °C, IP 67)
- Moment of inertia
- 15,38 gcm²
- Admitted shaft load
- ≤40 N axial
- ≤80 N radial
- Material
- Housing: steel zinc-coated
- Flange: aluminium
- Shaft: stainless steel
- Operating temperature
- -40...+65 °C (see general information)
- Relative humidity
- 95 %
- Resistance
- EN 60068-2-6
- Vibration 30 g, 10-2000 Hz
- EN 60068-2-27
- Shock 500 g, 1 ms
- Weight approx.
- 250 g
- Connection
- Flange connector M12, 8-pin
- Flange connector M12, 12-pin
- Flange connector M23, 12-pin
- Cable 2 m
Descargas
Data sheet
-
Catálogo – EAM580-SC - SSI
-
Catálogo – EAM580-SC - SSI
-
Catálogo – EAM580-SC - SSI
-
Catálogo – EAM580-SC - SSI
Quickstart
-
EAM580 - SSI
Brochures / Catalogs
-
Brochure – Magnetic absolute encoders EAM580 / EAM360
-
Brochure – Magnetic absolute encoders EAM580 / EAM360
-
Brochure – Magnetic absolute encoders EAM580 / EAM360
-
Brochure – Magnetic absolute encoders EAM580 / EAM360
-
Brochure – Magnetic absolute encoders EAM580 / EAM360
-
Brochure – Magnetic absolute encoders EAM580 / EAM360
Declaration of conformity
-
DoC / CoC - EAM580
3D CAD / CAE
-
EAM580 / EAM580R: Solid shaft ø10 mm, cable radial, clamping flange, IP65
-
EAM580 / EAM580R: Solid shaft ø10 mm, cable radial, clamping flange, IP67
-
EAM580: Solid shaft ø10 mm, M23 radial, clamping flange, IP65
-
EAM580 / EAM580R: Solid shaft ø10 mm, M12 radial, clamping flange, IP67
-
EAM580: Solid shaft ø10 mm, M23 radial, clamping flange, IP65
-
EAM580: Solid shaft ø10 mm, M23 radial, clamping flange, IP67
Accessories
Mounting accessories
|
Clamp set ø10 mm
Article no.: 10106004 |
|
Connectors and cables
|
Female connector M12, 8-pin, straight, without cable
Article no.: 10146775 |
|
|
|
Female connector M12, 8-pin, straight, shielded, 5 m cable (ESG 34FH0500GVS)
Article no.: 11170528 |
|
|
|
Female connector M12, 8-pin, straight, shielded, 10 m cable (ESG 34FH1000GVS)
Article no.: 11177375 |
|
|
|
Female connector M12, 8-pin, straight, shielded, 20 m cable
Article no.: 11091511 |
|
|
Female connector M23, 12-pin, straight, without cable
Article no.: 10116717 |
|
|
Female connector M12, 12-pin, straight, without cable
Article no.: 11078614 |
|
|
Female connector M12, 12-pin, straight, shielded, 2 m cable (ESG 34JP0200G)
Article no.: 11048452 |
|
|
|
Female connector M12, 12-pin, straight, shielded, 10 m cable (ESG 34JP1000G)
Article no.: 11048455 |
|