Suisse
ch
Français
XC700 |
XC700 |
|
|
|
|
|
|
|
||
| Current | Imax = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) Imax = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C) |
Imax = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) Imax = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C) |
| Feature comparison | count contour points contour comparison brightness contrast area size count areas pattern comparison find object positions |
count contour points contour comparison brightness contrast area size count areas pattern comparison find object positions |
| Flash memory size | 2000 Mbit Flash S34ML02G100BHI0000 | 2000 Mbit Flash S34ML02G100BHI0000 |
| Flash time | max. 1 ms (Duty Cycle max. 1:10) | max. 1 ms (Duty Cycle max. 1:10) |
| Geometry | Portée circle angle count edges point position edge characteristics |
Portée circle angle count edges point position edge characteristics |
| Part location | part location on contours part location on edges part location on circle part location on text line |
part location on contours part location on edges part location on circle part location on text line |
| Voltage | 12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed) |
12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed) |
| Conditions ambiantes | ||
| Classe de protection | IP 67 (with tube) | IP 67 (with tube) |
| Humidity | 0 … 90 % (non-condensing) | 0 … 90 % (non-condensing) |
| Mechanical shock resistance | EN 60068-2-27 | EN 60068-2-27 |
| Operating temperature | +5 … +55 °C @ T = measurement point | +5 … +55 °C @ T = measurement point |
| Résistance aux vibrations | IEC 60068-2-6 IEC 60068-2-64 |
IEC 60068-2-6 IEC 60068-2-64 |
| Température en magasin | -20 … +70 °C | -20 … +70 °C |
| Conformité | ||
| Conformity | CE RoHS KC (R-R-BkR-VeriSens-XC-IP) UL recognized |
CE RoHS KC (R-R-BkR-VeriSens-XC-IP) UL recognized |
| Données générales | ||
| Defect image memory | 32 | 8 |
| Features per job | 32 | 32 |
| High-resolution mode | max. 118 inspections per second | max. 32 inspections per second |
| High-speed mode (limited resolution) | max. 144 inspections per second | max. 54 inspections per second |
| Illumination | external, available as accessory | external, available as accessory |
| Illumination connection | direct (integrated VeriFlash® flash controller) | direct (integrated VeriFlash® flash controller) |
| Lens | C-mount | C-mount |
| Number of jobs (products) | ≤ 255 | ≤ 255 |
| Résolution | 640 × 480 px | 1280 × 960 px |
| Signal processing | Baumer FEX® 4.0 | Baumer FEX® 4.0 |
| Type de détecteur | 1/4" CCD, monochrome | 1/3″ CCD, monochrome |
| Données mécaniques | ||
| Height | 99,5 mm (without lens/tube) | 99,5 mm (without lens/tube) |
| Matériau | housing: aluminum cover glass XC tube: PMMA |
housing: aluminum cover glass XC tube: PMMA |
| Poids | ≤ 300 g (without lens/tube) | ≤ 300 g (without lens/tube) |
| Profondeur | 49,8 mm (without lens/tube) | 49,8 mm (without lens/tube) |
| Width | 53 mm (without lens/tube) | 53 mm (without lens/tube) |
| Données électriques | ||
| Digital inputs | 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz |
5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz |
| Digital outputs | 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable |
5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable |
| Initial setup | Ethernet (10BASE-T / 100BASE-TX) | Ethernet (10BASE-T / 100BASE-TX) |
| Inputs | 8 … 30 V (polarity protected) | 8 … 30 V (polarity protected) |
| Nominal voltage power supply | 24 V ±25 % | 24 V ±25 % |
| Nominal voltage power supply (add-on) | Class 2 according to NEC / protection class III | Class 2 according to NEC / protection class III |
| Nominal voltage power supply (info) | The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC. | The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC. |
| Outputs | PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof) | PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof) |
| Process interface | PROFINET (CC-A) EtherNet/IP™ TCP/UDP (Ethernet) |
PROFINET (CC-A) EtherNet/IP™ TCP/UDP (Ethernet) |
| Puissance absorbée | Max. 42 W (with I/O and lighting) | Max. 42 W (with I/O and lighting) |
| Visualization | configurable web interface with MultiViewer function | configurable web interface with MultiViewer function |
