Suisse
ch
Français
USB 3.0, 5 Megapixel, Color |
USB 3.0, 5 Megapixel, Color |
|
|
|
|
|
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono Raw Bayer RGB |
Mono Raw Bayer RGB |
| Dark noise | 2,17 e- | 2,03 e- |
| Dynamic range | 71,4 dB | 70,8 dB |
| Flash memory size | 128 kB | 128 kB |
| Quantum efficiency | 47,4 % @ 465 nm 58,4 % @ 536 nm 54 % @ 631 nm |
47,4 % @ 465 nm 58,4 % @ 536 nm 54 % @ 631 nm 46,6 % @ 467 nm 58,3 % @ 533 nm 52,9 % @ 630 nm |
| Saturation capacity | 10632 e- | 9382 e- |
| Signal-to-noise ratio | 40,3 dB | 39,7 dB |
| Conditions ambiantes | ||
| Classe de protection | IP 40 (with mounted lens and cable) | IP 40 (with mounted lens and cable) |
| Humidity | 10 … 90 % (non-condensing) | 10 … 90 % (non-condensing) |
| Operating temperature | 0 … +65 ° @ T = measurement point | 0 … +65 ° @ T = measurement point |
| Température en magasin | -20 … +70 °C | -20 … +70 °C |
| Conformité | ||
| Conformity | CE RoHS KC (MISP-REI-BkR-VCXU-50M) EAC BIS-CRS (R-41207004) |
CE RoHS |
| Données mécaniques | ||
| Height | 29 mm | 29 mm |
| Lens mount | C-mount | C-mount |
| Matériau | zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 | zinc die casting, baked varnish |
| Poids | ≤ 90 g | ≤ 90 g |
| Profondeur | 38 mm | 38 mm |
| Width | 29 mm | 29 mm |
| Données électriques | ||
| Operating voltage | 5 VDC (via USB3.0 interface) | 5 VDC (via USB3.0 interface) |
| Puissance absorbée | Approx. 2.7 W @ 75 fps | Approx. 2.4 W @ 35 fps |
| E/S numériques | ||
| Lines | 1 input line 1 output line 2 general purpose lines |
1 input line 1 output line 2 general purpose lines |
| Interfaces et connecteurs | ||
| Data interface | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B |
| Power supply | via USB 3.0 interface | via USB 3.0 interface |
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| caractéristiques de l'appareil | ||
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
User Set Integrated temperature sensor Readable additional information (e.g. sensor information) |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Basic Functions | Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Calibration data | Integrated color correction matrix (3000 K, 5000 K, 6500 K, 9500 K, and user defined) Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined) |
|
| Image Pre-processing | Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
| Internal image buffer | 445 MB 31 images (Trigger Mode) 1 image (Free Running Mode) |
445 MB 31 images (Trigger Mode) 1 image (Free Running Mode) |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source |
Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Synchronisation | free running trigger |
free running trigger |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Trigger sources | Hardware Software |
Hardware Software |
| formats d'acquisition | ||
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 2448 × 2048 px, max. 35 fps Full Frame, 2448 × 2048 px, max. 35 fps |
Full Frame, 2448 × 2048 px, max. 35 fps Full Frame, 2448 × 2048 px, max. 35 fps |
| Image formats, interface frame rate max. | Full Frame, 2448 × 2048 px, max. 35 fps Binning 2×2, 1224 × 1024 px, max. 35 fps Binning 2×1, 1224 × 2048 px, max. 35 fps Binning 1×2, 2448 × 1024 px, max. 35 fps |
Full Frame, 2448 × 2048 px, max. 35 fps Binning 2×2, 1224 × 1024 px, max. 35 fps Binning 2×1, 1224 × 2048 px, max. 35 fps Binning 1×2, 2448 × 1024 px, max. 35 fps |
| Pixel formats | BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
| information du capteur | ||
| Exposure time | 0,001 … 60000 ms | 0,001 … 60000 ms |
| Mono/Color | Color | Color |
| Pixel size | 3.45 × 3.45 µm | 3.45 × 3.45 µm |
| Résolution | 2448 × 2048 px | 2448 × 2048 px |
| Sensor | Sony IMX264 Gen2 | Sony IMX264 Gen2 |
| Sensor type | 2/3″ CMOS | 2/3″ CMOS |
| Shutter type | Global shutter | Global shutter |
