Connecteurs mâles et femelles |
||
|
|
|
|
||
AWG | 22 | |
Cable diameter | 4,7 mm ± 5% | |
Cable length | 200 cm | |
Conductor structure | 42 × 0,1 mm | |
Eclass | 27060311 | |
External sheath: Color | Blue | |
External sheath: Material | TPE-S | |
Head A: Angle cable outlet | 0° | |
Head A: Body color | Blue | |
Head A: Coding | A | |
Head A: Connection | M12 | |
Head A: Gasket material | EPDM | |
Head A: Gender | Female | |
Head A: Knurled nut material | Stainless steel (V4A) | |
Head A: LED | No | |
Head A: No. of poles | 4 | |
Head A: Tightening torque | 0,6 Nm | |
Head A: Width across flats | AF14 | |
Head B: Connection | Open-ended wires | |
Labeling sleeve side A | No | |
Labeling sleeve side B | No | |
Length tolerance | + 10 cm | |
Shielded | No | |
Stripping length | 20 mm | |
Wire cross section | 0,34 mm² | |
Cable | ||
AWG | 22 | |
Acceleration (C-track) | max. 10 m/s² | |
Bending radius (fixed) | min. 5 × outer diameter | |
Bending radius (mobile) | min. 10 × outer diameter | |
Cable diameter | 4,7 mm ± 5% | |
Cable length | 200 cm | |
Cable weight | approx. 29,7 g/m | |
Cable: Temperature range (fixed) | - 40 ...+ 105 °C | |
Cable: Temperature range (mobile) | - 25 ...+ 105 °C | |
Cable: Test voltage | 3 kV | |
Conductor structure | 42 × 0,1 mm | |
Conductor: Material | Copper, bare | |
External sheath: Color | Blue | |
External sheath: Material | TPE-S | |
Insulation: Material | PP | |
Length tolerance | + 10 cm | |
No. of torsion cycles | approx. 2000000 Cycles | |
No. of bending cycles (C-track) | approx. 4000000 Cycles | |
Nominal voltage | 300 V AC | |
Number and diameter of wires | 4x0,34 | |
Number of wires | 4 | |
Operating voltage (only UL listed) | 30 V AC/DC | |
Paired stranding | No | |
Shielded | No | |
Single wire diameter | 0,1 mm | |
Torsion speed | max. 35 cycles/min | |
Torsion stress in ° | ± 180 °/m | |
Total stranding | 4 wires strand | |
Travel speed (C-track) | max. 3 m/s | |
Traversing path (horizontal) | max. 10 m | |
Wire 1: Color | BN | |
Wire 2: Color | BK | |
Wire 3: Color | BU | |
Wire 4: Color | WH | |
Wire cross section | 0,34 mm² | |
Wire diameter incl. isolation | 1,27 mm ± 5% | |
Wire processing | No | |
Conditions ambiantes | ||
Cable: Acid and alkali resistant | Good (FDA 21 178.3620, 178.3297, 177.1520, EU 10/2011) | |
Cable: Chemical resistance | ECOLAB material resistance test passed | |
Cable: Silicone-free | Oui | |
Cable: Temperature range (fixed) | - 40 ...+ 105 °C | |
Dragchain capable | Oui | |
Head A: Acid and alkali resistant | ECOLAB tested | |
Head A: Chemical resistance | Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application. | |
Head A: Flame resistance | HB (UL 94) | |
Head A: Oil resistance | ASTM 1 oil, mineral oils, limited to hydraulic oils | |
Head A: Pollution degree | 3 | |
Temperature range (fixed) | - 40 ...+ 105 °C | |
Temperature range (mobile) | - 25 ...+ 105 °C | |
Données générales | ||
Blindage | Non blindé | |
Classe de protection | IP 65/67/68/69K | |
Dimension (tête 1) | M12 | |
Forme du boîtier (tête 1) | Droit | |
Longueur | 2 m | |
Matériau du gaine extérieure | PP | |
Nombre de pôles | 4 pôles | |
Propriétés spéciale | Food & Beverage | |
Type de connexion (tête 1) | Connecteur femelle | |
Type de connexion (tête 2) | Extrémité libre | |
Utilisation | Câble de raccordement pour Type de connecteur M12 |
|
Données mécaniques | ||
Acceleration (C-track) | max. 10 m/s² | |
Bending radius (fixed) | min. 5 × outer diameter | |
Bending radius (mobile) | min. 10 × outer diameter | |
Head A: Degree of protection | IP65, IP68, IP69K | |
No. of torsion cycles | approx. 2000000 Cycles | |
No. of bending cycles (C-track) | approx. 4000000 Cycles | |
Torsion speed | max. 35 cycles/min | |
Torsion stress in ° | ± 180 °/m | |
Travel speed (C-track) | max. 3 m/s | |
Données électriques | ||
Contact resistance | max. 30 mOhm | |
Nominal voltage | 300 V AC | |
Operating voltage | max. 250 V AC/DC | |
Operating voltage (only UL listed) | 30 V AC/DC | |
Operating current per contact | max. 4 A |