2. BDH
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 5 VDC ±10 %
  • 10...30 VDC
  • 4.5...30 VDC
Tip. corrente operativa
  • 80 mA (5 VDC, w/o load)
  • 60 mA (24 VDC, w/o load)
  • 180 mA (4.5 VDC, w/o load)
Impulsi per giro
  • 10 … 5000
Segnale di riferimento
  • Impulso zero, ampiezza 90°
Principio di scansione
  • Ottico
Frequenza di uscita
  • ≤200 kHz (24K)
  • ≤300 kHz (05A/25W)
Segnale di uscita
  • A 90° B, N + invertito
Livelli di uscita
  • Antivalent
  • Push-pull short-circuit proof
  • Push-pull antiv. short-circuit proof
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • UL approval / E217823
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø55 mm
Tipo di albero
  • ø10 mm solid shaft (clamping flange)
Carico dell‘albero massimo ammesso
  • ≤40 N assiale
  • ≤60 N radiale
Flangia
  • Clamping flange
Classe di protezione EN 60529
  • IP 42
  • IP 65
Velocità operativa
  • ≤12000 rpm (IP 42)
  • ≤6000 rpm (IP 65)
Tip. coppia operativa
  • 0,022 Nm (IP 42)
  • 0,026 Nm (IP 65)
Materiale
  • Housing: steel
  • Housing: aluminium (connection ‑A)
  • Flange: aluminium
Temperatura operativa
  • -20...+85 °C
Relative humidity
  • 95 % non-condensing
Resistenza
  • EN 60068-2-6
  • Vibrazione 10 g, 10-2000 Hz
  • EN 60068-2-27
  • Urti 50 g, 11 ms
Allacciamento
  • Connector M23, 12-pin
  • Cable 2 m
Peso ca.
  • 300 g
Scaricare
Data sheet
Output switch

Disegni
Drawings

(png | 124 KB)

(png | 148 KB)

(png | 120 KB)

(png | 136 KB)

(png | 127 KB)

(png | 150 KB)

(png | 125 KB)

(png | 138 KB)

(png | 84 KB)
Accessori
Accessori di montaggio
The selected altAttribute does not exist! Mounting adaptor
For encoders with clamping flange

Articolo n..: 10125051
  • Glass-fiber reinforced plastic
  • Excellent resistance against temperature and chemicals
  • Electrically isolated encoder mount
The selected altAttribute does not exist! Adaptor plate for clamping flange to convert into synchro flange

Articolo n..: 10141255
  • Adaptor plate for encoder with clamping flange for modification into synchro flange
The selected altAttribute does not exist! Bellows coupling (D1=10 / D2=10)
For encoder with solid shaft

Articolo n..: 11053277
  • Backlash-free angle-synchronous transmission
  • Optimum compensation of misalignments
  • Very high torsional spring stiffness
  • Small restoring force
  • Vibration damping
  • Stainless steel bellows
Connettori e cavi
Female connector M23, 12-pin, straight, without cable

Articolo n..: 10107687
  • Female connector M23 with screwable nut
  • With or without cable (shielded) in different lengths
  • Cable version: shield is placed onto the connector housing
Female connector M23, 12-pin, straight, with cable 5 m (ESG 23JH0500GVI)

Articolo n..: 11176942
  • Female connector M23 with screwable nut
  • With cable (shielded) in different lengths
  • Cable version: shield is placed onto the connector housing
  • Cable for flexible cable carriers
Female connector M23, 12-pin, straight, with cable 10 m (ESG 23JH01000GVI)

Articolo n..: 11176944
  • Female connector M23 with screwable nut
  • With cable (shielded) in different lengths
  • Cable version: shield is placed onto the connector housing
  • Cable for flexible cable carriers
Female connector M23, 12-pin, straight, with cable 2 m (ESG 23JH0200GVI)

Articolo n..: 11176945
  • Female connector M23 with screwable nut
  • With cable (shielded) in different lengths
  • Cable version: shield is placed onto the connector housing
  • Cable for flexible cable carriers
In alto