HOG 86 + DSL

Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.

Mounting kit earthing-strap (length of the earthing strap: ~230 mm) to fix at the encoder.

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 425...460 mm
• Can be shortened to ≥131 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 425...460 mm
• Can be shortened to ≥131 mm

Support plate mounting kit R63 to fix a torque arm size M6 at the encoder.

Support plate mounting kit R69 to fix a torque arm size M6 at the encoder.

Screw mounting kit to fix a torque arm size M6 direct to the encoder (without support plate).

Mounting kit for fixing a torque arm size M6.

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

• USB 2.0 to RS485 converter for Laptop and PC
• USB 1.1 and 2.0 compatibility
• Supports two-wire RS485 read/write operation
• Power supply via USB

• Connecting cable for DSL-RS485 interface
• USB 2.0 to RS485 converter for Laptop and PC
• USB 1.1 and 2.0 compatibility
• Supports two-wire RS485 read/write operation
• Power supply via USB

Switch relay box for switching high voltages and currents for a digital speed switch (for example DSL or DS 93). Triggering is carried out by the three line drivers.