UR12.P50-GP2C.7BCU

Dati tecnici

mostra tutti

Dati generali

Special type

2 point proximity switch

Scanning range Sd

15 … 500 mm

Scanning range close limit Sdc

15 … 500 mm

Scanning range far limit Sde

15 … 500 mm

Version

IO-Link dual channel
Multiplex version

Hysteresis typ.

4 % Sde

Repeat accuracy

< 0,5 mm

Temperature drift

> 50 mm < 2 % of distance to target Sde
< 50 mm ± 1 mm

Power-up drift

Compensated after 15 min.

Response time ton/toff min

< 16 ms

Response time ton/toff standard

< 40 ms

Sonic frequency

290 kHz

Adjustment

line-Teach, IO-Link

Output indicator

Yellow LED / red LED

Light indicator

LED yellow

Power on indication

LED green

Alignment measuring axis

< 2°

Resolution

< 0,3 mm

Dati elettrici

Tensione di alimentazione +Vs

12 … 30 VDC

Corrente assorbita media

35 mA

Circuito di uscita

Push-pull

Output current

100 mA

Caduta di tensione Vd

<3 VDC

Residual ripple

< 10 % Vs

Protezione da cortocircuito

Protezione dall'inversione di polarità

Yes, Vs to GND

Interface

IO-Link V1.1

Baud rate

38,4 kBaud (COM 2)

Cycle time

≥ 8 ms

Process data length

48 Bit

Process data structure

Bit 0 = SSC1 (distance)
Bit 1 = SSC2 (distance)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 8-15 = scale factor
Bit 16-47 = 32 Bit measurement

IO-Link port type

Class A

Additional data

Distance
Excess gain
Operating cycles
Operating hours
Boot cycles
Tensione di funzionamento
Device temperature
Histograms

Adjustable parameters

Time filters
LED status indicators
Output logic
Output circuit
Counter
Beam forming
Deactivate the sensor element
Find Me function

IO-Link

Dati meccanici

Design

Cylindrical threaded

Housing material

Brass nickel plated

Width / diameter

12 mm

Height / length

50 mm

Connection types

Cable 5 pin, 2 m

Tightening torque max.

15 Nm (Front: 10 Nm)

Condizioni ambientali

Temperatura d'esercizio

-25 … +65 °C

Storage temperature

-40 … +75 °C

Tipo di protezione

IP 67

Modello 3D

mostra tutti

Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.

software

mostra tutti

Software

Software – IODD V1.1 (UR12.P50-GP2C)
- (zip | 339 KB)

Scaricare

mostra tutti

Data sheet

Schede tecniche – UR12.P50-GP2C.7BCU
- ZH (pdf | 880 KB)
Schede tecniche – UR12.P50-GP2C.7BCU
- FR (pdf | 811 KB)
Schede tecniche – UR12.P50-GP2C.7BCU
- DE (pdf | 805 KB)
Schede tecniche – UR12.P50-GP2C.7BCU
- EN (pdf | 792 KB)

Quickstart

Quickstart – UR12
- EN/DE/FR/IT/ZH/ES (pdf | 470 KB)

Software Manual

Operating instruction – IO-Link
- EN (pdf | 2 MB)

Certificates / approvals

DoC / CoC - UR12
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 292 KB)

EPLAN

Link al portale dati
- Link al portale dati

Diagrammi

mostra tutti

Typical sonic cone profile

(png | 152 KB)

Disegni

mostra tutti

Drawings

The selected altAttribute does not exist!

(png | 32 KB)

Connection diagram

(png | 112 KB)

Accessori

mostra tutti

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Articolo n..: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	IO-Link Master PROFINET, 8-Port, IP67 Articolo n..: 11215447	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master PROFINET, 8-Port, IP20 Articolo n..: 11215445	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP67 Articolo n..: 11215460	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP20 Articolo n..: 11215448	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	USB-C IO-Link Master Articolo n..: 11234828	Compact IO-Link master perfectly suited for testing and getting to know IO-Link sensors Simple power supply via USB-C Quick and easy connection with the Baumer Sensor Suite Specifically designed with the needs of engineering and service in mind
	SensControl Wireless IO-Link Master Articolo n..: 11214576	Integration of IO-Link sensors via USB Including power supply (EU, KOR, USA, AUS, UK) and USB cable

Mounting accessories

	Sensofix series 12 round Articolo n..: 10151720	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	Mounting rod with mounting plate holder 200 mm Articolo n..: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Articolo n..: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Articolo n..: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Articolo n..: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Articolo n..: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Articolo n..: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 300 and ø12 mm Articolo n..: 11707701	Material: Steel Part of an assembly
	Mounting base Articolo n..: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Articolo n..: 11707703	Material: Plastic (PA) Part of an assembly