2. Panoramica dei prodotti
  3. Riconoscimento oggetti
  4. Sensori fotoelettrici
  5. O200
  6. Oggetti olto brillanti e di colore nero intenso
  7. O200.GL-GW2I.72CV/A014_F040_H006
Dati tecnici
Dati generali
Type
  • Background suppression
Version
  • IO-Link dual channel
Campo di lavoro Tw
  • 20 … 120 mm
Zona di scansione Tb
  • 3 … 132 mm
Smallest object recognizable typ.
  • 0,05 mm at 40 mm
Power on indication
  • LED green
Alignment / soiled lens indicator
  • Flashing output indicator
Output indicator
  • LED yellow
Sensing distance adjustment
  • IO-Link
Distance to focus
  • 40 mm
Suppression of reciprocal influence
  • Si
Beam type
  • Point
Allineamento asse ottico
  • < 1,5°
Fonte di luce
Light source
  • Pulsed red laser diode
Laser class
  • 1
Wave length
  • 680 nm
Dati elettrici
Tempo di risposta / di caduta
  • < 0,4 ms (High Speed Mode)
Jitter
  • < 0,21 ms (High Speed Mode)
Tensione di alimentazione +Vs
  • 10 … 30 VDC
Corrente assorbita max. (senza carico)
  • 20 mA (@ 10 VDC)
Corrente assorbita media
  • 10 mA (@ 24 VDC)
Caduta di tensione Vd
  • <2 VDC
Funzione di commutazione
  • In presenza/per assenza di luce
Circuito di uscita
  • Push-pull
Output current
  • 50 mA (< 40 °C), sum of all outputs
  • 20 mA (< 50 °C), sum of all outputs
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Interface
  • IO-Link V1.1
IO-Link port type
  • Class A
Baud rate
  • 38,4 kBaud (COM 2)
Cycle time
  • ≥ 2,7 ms
Process data length
  • 32 Bit
Process data structure
  • Bit 0 = SSC1 (presence)
  • Bit 2 = quality
  • Bit 3 = alarm
  • Bit 5 = SSC4 (counter)
  • Bit 16-31 = 16 Bit measurement
Adjustable parameters
  • Switching point
  • Switching hysteresis
  • Time filters
  • LED status indicators
  • Output logic
  • Output circuit
  • Counter
  • Operation mode
  • Deactivate the sensor element
  • Find Me function
  • Teach-in mode
Additional data
  • Excess gain
  • Operating cycles
  • Device temperature
Dati meccanici
Width / diameter
  • 8 mm
Height / length
  • 25,1 mm
Depth
  • 15,8 mm
Design
  • Rectangular
Mechanical mounting
  • Threaded sleeves M3 (stainless steel)
Housing material
  • Plastic (ASA, PMMA)
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Cable characteristics
  • PVC / PVC 4 x 0.08 mm²
Condizioni ambientali
Tipo di protezione
  • IP 67
Temperatura d'esercizio
  • -20 … +50 °C
Modello 3D
Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.

software
Software

Scaricare
Data sheet
Operating Manual
Software Manual
Certificates / approvals
EPLAN

Diagrammi
Sensing distance diagram

(png | 132 KB)
Hysteresis curve

(png | 135 KB)
Disegni
Drawings

(png | 63 KB)
Connection diagram

(png | 129 KB)
Beam characteristic (typically)

(png | 95 KB)
Laser warning

(png | 229 KB)
Accessori
Peripherals
ZTEST-ALL.DIGITAL
Test unit for sensors digital

Articolo n..: 11084377
  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! USB IO-Link Master
USB IO-Link Master

Articolo n..: 11048016
  • Integration of IO-Link sensors via USB
  • Including power supply (EU, KOR, USA, AUS, UK) and USB cable
Mounting accessories
10150326
Sensofix series 10 / series 20

Articolo n..: 10150326
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
ZADAP-200.STRAIGHT
Mounting bracket O200

Articolo n..: 11206601
  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.ANGLE_L
Mounting bracket O200 (L design)

Articolo n..: 11206602
  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.ANGLE_S
Mounting bracket O200 (S design)

Articolo n..: 11206603
  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.SERIES10
Mounting bracket O200 - Retrofit for sensors series 10

Articolo n..: 11208477
  • Material: plastic
In alto