O200.RP-GW1J.72CV/H006

Articolo n..: 11208515

Extended functional reserve capacities for maximum reliability
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
Manipulation-proof, simple teach-in via qTeach or line teach
IO-Link for extended parameterization options and additional diagnostic data
Quick mounting by means of M3 threaded bushes made of stainless steel

1 pezzi immediatamente disponibili a magazzino

Dati tecnici

mostra tutti

Dati generali

Type

Retro-reflective sensor

Light source

Pulsed PinPoint LED

Actual range Sb

Nominal range Sn

Smallest object recognizable typ.

4 mm (FTAR 013A000)

Polarization filter

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Teach-in and IO-Link

Wave length

644 nm

Suppression of reciprocal influence

Allineamento asse ottico

< 1,5°

Dati elettrici

Tempo di risposta / di caduta

< 0,25 ms

Tensione di alimentazione +Vs

10 … 30 VDC

Corrente assorbita max. (senza carico)

40 mA (@ 10 VDC)

Corrente assorbita media

16 mA (@ 24 VDC)

Caduta di tensione Vd

<2 VDC

Funzione di commutazione

In presenza/per assenza di luce

Circuito di uscita

Push-pull

Output current

50 mA

Protezione da cortocircuito

Protezione dall'inversione di polarità

Baud rate

230,4 kBaud (COM 3)

Adjustable parameters

Switching point
Time filters
LED status indicators
Output logic
Counter
Deactivate the sensor element
Find Me function
Teach-in mode

IO-Link port type

Class A

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Interface

IO-Link V1.1

Additional data

Signal strength
Excess gain
Operating cycles
Device temperature

Cycle time

≥ 0,6 ms

Dati meccanici

Width / diameter

8 mm

Height / length

25,1 mm

Depth

15,8 mm

Design

Rectangular

Mechanical mounting

Threaded sleeves M3 (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Condizioni ambientali

Temperatura d'esercizio

-25 … +50 °C

Tipo di protezione

IP 67

Modello 3D

mostra tutti

Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.

software

mostra tutti

Software

Software – IODD V1.1 (O200x.RP)
- (zip | 260 KB)

Scaricare

mostra tutti

Data sheet

Schede tecniche – O200.RP-GW1J.72CV/H006
- ZH (pdf | 1 MB)
Schede tecniche – O200.RP-GW1J.72CV/H006
- FR (pdf | 1 MB)
Schede tecniche – O200.RP-GW1J.72CV/H006
- DE (pdf | 1 MB)
Schede tecniche – O200.RP-GW1J.72CV/H006
- EN (pdf | 1 MB)

Quickstart

Quickstart – O200 Xpert
- EN/DE/FR/ES/IT/ZH (pdf | 667 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

EPLAN

Link al portale dati
- Link al portale dati

Diagrammi

mostra tutti

Excess gain curve

(png | 245 KB)

(png | 248 KB)

Disegni

mostra tutti

Accessori

mostra tutti

Reflectors

	ZREFL-200.STANDARD Reflector rectangular Articolo n..: 11206604	Fastening method screw mounting With attached reflective tape For Retro-reflective sensors Mounting compatible to series 200
	FTDR 084A084 Reflector rectangular 84 x 84 mm Articolo n..: 11101254	Fastening method screw mounting For Retro-reflective sensors
	FTDR 010A014 Reflector rectangular 16,8 x 12,8 mm Articolo n..: 10123622	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 015A038 Reflector rectangular 40 x 18 mm Articolo n..: 10128191	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 017A027 Reflector rectangular 43 x 20,3 mm Articolo n..: 10145962	Fastening method screw mounting Micro structure For Retro-reflective sensors
	FTDR 029A046 Reflector rectangular 48 x 32,5 mm Articolo n..: 10125741	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 047A048 Reflector rectangular 75 x 54 mm Articolo n..: 10145961	Fastening method screw mounting For Retro-reflective sensors
	FTAR 013A000 Reflector round Ø 15 mm Articolo n..: 10145963	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 019A000 Reflector round Ø 21 mm Articolo n..: 11107543	Fastening method self-adhesive For Retro-reflective sensors
	FTAR 020A000 Reflector round Ø 25,2 mm Articolo n..: 10138929	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 038A000 Reflector round Ø 46 mm Articolo n..: 11006499	Fastening method self-adhesive For Retro-reflective sensors
	FTDF 020F020 Reflective tape rectangular 20 x 20 mm Articolo n..: 10128299	Fastening method self-adhesive For laser light sensors
	Z-FTDF 050K0100 Reflective type rectangular 50 x 100 mm Articolo n..: 11120355	Fastening method self-adhesive For Retro-reflective sensors

Peripherals

	IO-Link Master PROFINET, 8-Port, IP67 Articolo n..: 11215447	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP67 Articolo n..: 11215460	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	IO-Link Master PROFINET, 8-Port, IP20 Articolo n..: 11215445	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP20 Articolo n..: 11215448	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	ZTEST-ALL.DIGITAL Test unit for sensors digital Articolo n..: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Articolo n..: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	10150326 Sensofix series 10 / series 20 Articolo n..: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Articolo n..: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Articolo n..: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Articolo n..: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Articolo n..: 11208477	Material: plastic