Measuring amplifier for 1-1 replacement of DABU AD2T-2Q |
||
|
|
|
Compliance and approvals | ||
Conformity | CE UL |
|
Electrical data | ||
Current consumption | < 40 mA | |
Cut-off frequency (3 db) | 1000 Hz | |
Reverse polarity protection | Yes | |
Short circuit protection | Yes | |
Supply voltage | 18 ... 30 VDC | |
Zero adjustment active | > 5 VDC | |
Zero adjustment inactive | < 1 VDC | |
Zero adjustment pulse | > 1 ms | |
Zero adjustment time | < 30 ms | |
Electrical data bridge | ||
Bridge resistance | ≥ 350 Ω | |
Power supply | 2.5 VDC | |
Signal area | 500 μm/m | |
Environmental conditions | ||
Operating temperature range | -40 ... 85 °C | |
Protection class EN 60529, ISO20653 | IP 65 | |
Random IEC 60068-2-64 | 20 ... 1000 Hz: 0.1 g²/Hz | |
Shock IEC 60068-2-27 | 50 g / 11 ms, 100 g / 6 ms | |
Storage temperature range | -40 ... 85 °C | |
Vibration IEC 60068-2-6 | 10 … 57 Hz: 1.5 mm p-p, 58 ... 2000 Hz: 10 g | |
General data | ||
Non-linearity | < 0.01 % | |
Output signal | ± 10 VDC | |
Repeatability | < 0.01 % | |
Zero point deviation | < 0.2 % | |
Mechanical data | ||
Electrical connection on control side | M12, 5 pin, male | |
Electrical connection on sensor side | M9, 4 pin, female | |
Material housing | Aluminium, 6060, chem. passivated |