Gigabit Ethernet, 20 Megapixel, Monochrome

  • 5472 x 3648 px
  • Sony IMX183
  • 1" CMOS
  • 6 fps
  • Gigabit Ethernet

Gigabit Ethernet, 20 Megapixel, Monochrome

  • 5472 x 3648 px
  • Sony IMX183
  • 1" CMOS
  • 6 fps
  • Gigabit Ethernet
Analog controls Gain (0 … 20 dB)
Offset (0 … 255 LSB 12 Bit)
Gain (0 … 20 dB)
Offset (0 … 255 LSB 12 Bit)
Color models Mono Mono
Dark noise 3,05 e- 3,05 e-
Dynamic range 71,8 dB 71,8 dB
Flash memory size 128 kB 128 kB
Quantum efficiency 77,8 % @ 535 nm 77,8 % @ 535 nm
Saturation capacity 14662 e- 14662 e-
Signal-to-noise ratio 41,7 dB 41,7 dB
Conditions ambiantes
Classe de protection IP 40 (with mounted lens and cable)
IP 54 (with mounted lens and cable)
IP 65 (with mounted tube and cable)
IP 67 (with mounted tube and cable)
IP 69K (with stainless steel housing accessory)
IP 40 (with mounted lens and cable)
IP 54 (with mounted lens and cable)
IP 65 (with mounted tube and cable)
IP 67 (with mounted tube and cable)
IP 69K (with stainless steel housing accessory)
Humidity 10 … 90 % (non-condensing) 10 … 90 % (non-condensing)
Operating temperature 0 … +65 ° @ T = measurement point 0 … +65 ° @ T = measurement point
Température en magasin -20 … +70 °C -20 … +70 °C
Conformité
Conformity CE
RoHS
CE
RoHS
Données mécaniques
Height 40 mm 40 mm
Lens mount C-mount C-mount
Matériau aluminum, hard-anodized aluminum, hard-anodized
Poids ≤ 137 g ≤ 137 g
Profondeur 50,8 mm 50,8 mm
Width 40 mm 40 mm
Données électriques
Plage de tension +Vs 12 … 24 V DC (external power supply)
36 … 57 V DC (Power over Ethernet)
12 … 24 V DC (external power supply)
36 … 57 V DC (Power over Ethernet)
Puissance absorbée Approx. 2.3 W @ 12 VDC and 6 fps
Approx. 3.0 W @ 48 VDC (PoE) and 6 fps
Approx. 3.0 W @ 12 VDC and 9 fps
Approx. 3.7 W @ 48 VDC (PoE) and 9 fps
E/S numériques
Lines 4 input lines
4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
4 input lines
4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
Output line sources Off
Exposure Active
Timer1
Readout Active
User0
User1
User2
TriggerReady
Off
Exposure Active
Timer1
Readout Active
User0
User1
User2
TriggerReady
Interfaces et connecteurs
Data interface Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
Power supply via M12/8 pins x-coded or Power over Ethernet (PoE) via M12/12 pins a-coded or Power over Ethernet (PoE)
Process interface M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
caractéristiques de l'appareil
Acquisition / Interface Burst Mode
Adjustable Framerate
Device Link Throughput Limit
Internal Image Buffer
Burst Mode
Adjustable Framerate
Device Link Throughput Limit
Internal Image Buffer
Additional Functions User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Save Custom Data
User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Auto Functions Exposure Auto
Gain Auto
Exposure Auto
Gain Auto
Basic Functions Exposure
Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Exposure
Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Calibration data Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
Customer data storage (128 bytes user defined)
Image Pre-processing LUT / Gamma LUT / Gamma
Internal image buffer 58 MB
1 image (Trigger Mode)
1 image (Free Running Mode)
58 MB
1 image (Trigger Mode)
1 image (Free Running Mode)
Process Synchronization Events
Timer
Trigger Delay
Debouncer
Counter
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
PWM (PWM Duration / PWM Duty Cycle)
4 power outputs with up to 120 W (max. 48 V / 2.5 A)
Selectable Output format (e.g. Tri State, Push Pull)
Chunk data inside transferred image
Encoder support via Counter End trigger source
Events
Timer
Trigger Delay
Debouncer
Counter
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
PWM (PWM Duration / PWM Duty Cycle)
4 power outputs with up to 120 W (max. 48 V / 2.5 A)
Selectable Output format (e.g. Tri State, Push Pull)
Chunk data inside transferred image
Encoder support via Counter End trigger source
Synchronisation free running
trigger
free running
trigger
Trigger delay 0 … 2 sec, tracking and buffering of up to 256 trigger signals 0 … 2 sec, tracking and buffering of up to 256 trigger signals
Trigger sources Hardware
Software
ActionCommand
Hardware
Software
ActionCommand
formats d'acquisition
Image formats, aquisition frame rate max. (Burst Mode) Full Frame, 5472 × 3648 px, max. 9 fps Full Frame, 5472 × 3648 px, max. 9 fps
Image formats, interface frame rate max. Full Frame, 5472 × 3648 px, max. 6 fps
Binning 2×2, 2736 × 1824 px, max. 9 fps
Binning 2×1, 2736 × 3648 px, max. 6 fps
Binning 1×2, 5472 × 1824 px, max. 9 fps
Full Frame, 5472 × 3648 px, max. 6 fps
Binning 2×2, 2736 × 1824 px, max. 9 fps
Binning 2×1, 2736 × 3648 px, max. 9 fps
Binning 1×2, 5472 × 1824 px, max. 9 fps
Pixel formats Mono8
Mono10
Mono12
Mono12 Packed
Mono8
Mono10
Mono12
Mono12 Packed
information du capteur
Exposure time 0,115 … 60000 ms 0,115 … 60000 ms
Mono/Color Mono Mono
Pixel size 2.4 × 2.4 µm 2.4 × 2.4 µm
Résolution 5472 × 3648 px 5472 × 3648 px
Sensor Sony IMX183 Sony IMX183
Sensor type 1″ CMOS 1″ CMOS
Shutter type Rolling shutter
Global reset shutter
Rolling shutter
Global reset shutter
Au sommet