• Connectuer femelle M12 avec écrou d’accouplement vissable
  • Avec ou sans câble (blindé) en différentes longueurs
  • M12, female, A-coded, 12-poles; PUR, 200 cm, shielded, free cable end
  • Dragchain capable
  • Head A: IP67
  • Cable: good resistance against chemicals, flames, oils
  • Halogen free
AWG 26
Cable diameter 6,5 mm ± 5%
Cable length 200 cm
Conductor structure 18 × 0,1 mm
Eclass 27060311
External sheath: Color Black
External sheath: Material PUR
Head A: Angle cable outlet
Head A: Body color Black
Head A: Coding A
Head A: Connection M12
Head A: Gasket material FKM
Head A: Gender Female
Head A: Knurled nut material Zinc-pressure die casting, surface Ni
Head A: LED No
Head A: No. of poles 12
Head A: Tightening torque 0,6 Nm
Head A: Width across flats AF13
Head B: Connection Open-ended wires
Labeling sleeve side A Yes
Labeling sleeve side B Yes
Length tolerance + 10 cm
Shielded Oui
Stripping length 80 mm
Wire cross section 0.14 mm²
Cable
AWG 26
Acceleration (C-track) max. 5 m/s²
Bending radius (fixed) min. 5 × outer diameter
Bending radius (mobile) min. 10 × outer diameter
Cable diameter 6,5 mm ± 5%
Cable length 200 cm
Cable type 3
Cable weight approx. 67,1 g/m
Cable: Temperature range (fixed) - 40 ...+ 80 °C
Cable: Temperature range (mobile) - 25 ...+ 80 °C
Cable: Test voltage 2 kV AC core-core ; 2 kV AC core-shield
Conductor structure 18 × 0,1 mm
Conductor: Material Copper, bare
External sheath: Color Black
External sheath: Material PUR
Insulation: Material PP
Length tolerance + 10 cm
No. of torsion cycles approx. 2000000 Cycles
No. of bending cycles (C-track) approx. 5000000 Cycles
Nominal voltage 300 V
Number and diameter of wires 12x0,14
Number of wires 12
Paired stranding No
Shielded Oui
Shielding attenuation 80
Shielding: Covering approx. 80 %
Shielding: Material Copper, tinned
Single wire diameter 0,1 mm
Torsion speed max. 35 cycles/min
Torsion stress in ° ± 30 °/m
Total stranding 3 wires strand, above that 9 wires strand
Travel speed (C-track) max. 3,3 m/s
Traversing path (horizontal) max. 5 m
Wire 10: Color GN
Wire 11: Color WH
Wire 12: Color BU
Wire 1: Color GYPK
Wire 2: Color VT
Wire 3: Color RDBU
Wire 4: Color BN
Wire 5: Color RD
Wire 6: Color GY
Wire 7: Color BK
Wire 8: Color YE
Wire 9: Color PK
Wire cross section 0.14 mm²
Wire diameter incl. isolation 1 mm ± 5%
Wire processing No
Caractéristiques mécaniques
Protection EN 60529 IP 65
IP 68
IP 69K
Caractéristiques techniques
Courant nominal 1,5 A
Diamètre du fil 1,00 +0,05 mm
Diamètre extérieur 8,5 mm
Longueur du câble 2 m, 5 m, 10 m (autres longueurs sur demande)
Matière Gaine: PUR noir
Rayon de courbure 85 mm
Résistance d'isolation ≥100 MΩ
Résistance du conducteur 142 Ω/km (20 °C)
Section maxi. fils 12 x 0,14 mm²
Tension nominale 30 V
Conditions ambiantes
Cable: Chemical resistance Good (DIN EN 60811-404)
Cable: Flame resistance Conform UL 1581 §1090 (H), CSA FT2, IEC 60332-2-2
Cable: Oil resistance Good (DIN EN 60811-404)
Cable: Silicone-free Oui
Cable: Temperature range (fixed) - 40 ...+ 80 °C
Dragchain capable Oui
Head A: Acid and alkali resistant No
Head A: Chemical resistance No
Head A: Flame resistance HB (UL 94)
Head A: Oil resistance ASTM 1 oil, mineral oils, limited to hydraulic oils
Head A: Pollution degree 3
Temperature range (fixed) - 25 ...+ 80 °C
Temperature range (mobile) - 25 ...+ 80 °C
Données mécaniques
Acceleration (C-track) max. 5 m/s²
Bending radius (fixed) min. 5 × outer diameter
Bending radius (mobile) min. 10 × outer diameter
Head A: Degree of protection IP65, IP66K, IP67
No. of torsion cycles approx. 2000000 Cycles
No. of bending cycles (C-track) approx. 5000000 Cycles
Torsion speed max. 35 cycles/min
Torsion stress in ° ± 30 °/m
Travel speed (C-track) max. 3,3 m/s
Données électriques
Contact resistance max. 30 mOhm
Nominal voltage 300 V
Operating voltage max. 30 V AC/DC
Operating current per contact max. 1,5 A
Au sommet