France
fr
Français
Câbles de connexion |
||
|
|
|
|
|
|
||
| AWG | 24 | |
| Cable diameter | 4,5 mm ± 5% | |
| Cable length | 100 cm | |
| Conductor structure | 32 × 0,1 mm | |
| Eclass | 27060311 | |
| External sheath: Color | Black | |
| External sheath: Material | PUR | |
| Head A: Angle cable outlet | 0° | |
| Head A: Body color | Black | |
| Head A: Coding | A | |
| Head A: Connection | M12 | |
| Head A: Gender | Male | |
| Head A: Knurled nut material | Zinc-pressure die casting, surface Ni | |
| Head A: LED | No | |
| Head A: No. of poles | 4 | |
| Head A: Tightening torque | 0,6 Nm | |
| Head A: Width across flats | AF13 | |
| Head B: Angle cable outlet | 0° | |
| Head B: Body color | Black | |
| Head B: Coding | A | |
| Head B: Connection | M8 | |
| Head B: Gasket material | FKM | |
| Head B: Gender | Female | |
| Head B: Knurled nut material | Zinc-pressure die casting, surface Ni | |
| Head B: LED | No | |
| Head B: No. of poles | 4 | |
| Head B: Tightening torque | 0,4 Nm | |
| Head B: Width across flats | AF9 | |
| Labeling sleeve side A | Yes | |
| Labeling sleeve side B | Yes | |
| Length tolerance | + 5 cm | |
| Shielded | No | |
| Wire cross section | 0.25 mm² | |
| Cable | ||
| AWG | 24 | |
| Acceleration (C-track) | max. 10 m/s² | |
| Bending radius (fixed) | min. 5 × outer diameter | |
| Bending radius (mobile) | min. 10 × outer diameter | |
| Cable diameter | 4,5 mm ± 5% | |
| Cable length | 100 cm | |
| Cable type | 3 | |
| Cable weight | approx. 33 g/m | |
| Cable: Temperature range (fixed) | - 40 ...+ 80 °C | |
| Cable: Temperature range (mobile) | - 25 ...+ 80 °C | |
| Cable: Test voltage | 2,5 kV | |
| Conductor structure | 32 × 0,1 mm | |
| Conductor: Material | Copper, bare | |
| External sheath: Color | Black | |
| External sheath: Material | PUR | |
| External sheath: Shore hardness | 90 ± 5 A | |
| Insulation: Material | PP | |
| Length tolerance | + 5 cm | |
| No. of torsion cycles | approx. 2000000 Cycles | |
| No. of bending cycles (C-track) | approx. 10000000 Cycles | |
| Nominal voltage | 300 V | |
| Number and diameter of wires | 4x0,25 | |
| Number of wires | 4 | |
| Operating voltage (only UL listed) | 30 V AC/DC | |
| Paired stranding | No | |
| Shielded | No | |
| Single wire diameter | 0,1 mm | |
| Torsion speed | max. 35 cycles/min | |
| Torsion stress in ° | ± 180 °/m | |
| Total stranding | 4 wires strand | |
| Travel speed (C-track) | max. 3 m/s | |
| Traversing path (horizontal) | max. 10 m | |
| Wire 1: Color | BN | |
| Wire 2: Color | BK | |
| Wire 3: Color | BU | |
| Wire 4: Color | WH | |
| Wire cross section | 0.25 mm² | |
| Wire diameter incl. isolation | 1,25 mm ± 5% | |
| Wire processing | No | |
| Conditions ambiantes | ||
| Cable: Chemical resistance | Good (DIN EN 60811-404) | |
| Cable: Flame resistance | Conform UL 1581 §1090 (H), CSA FT2, IEC 60332-2-2 | |
| Cable: Oil resistance | Good (DIN EN 60811-404) | |
| Cable: Silicone-free | Oui | |
| Cable: Temperature range (fixed) | - 40 ...+ 80 °C | |
| Dragchain capable | Oui | |
| Head A: Acid and alkali resistant | No | |
| Head A: Chemical resistance | No | |
| Head A: Flame resistance | HB (UL 94) | |
| Head A: Oil resistance | ASTM 1 oil, mineral oils, limited to hydraulic oils | |
| Head A: Pollution degree | 3 | |
| Head B: Acid and alkali resistant | No | |
| Head B: Chemical resistance | No | |
| Head B: Flame restistance | HB (UL 94) | |
| Head B: Oil resistance | ASTM 1 oil, mineral oils, limited to hydraulic oils | |
| Head B: Pollution degree | 3 | |
| Temperature range (fixed) | - 25 ...+ 80 °C | |
| Temperature range (mobile) | - 25 ...+ 80 °C | |
| Données générales | ||
| Blindage | Non blindé | |
| Classe de protection | IP 65/67/68 | |
| Dimension (tête 1) | M8 | |
| Dimension (tête 2) | M12 | |
| Forme du boîtier (tête 1) | Droit | |
| Forme du boîtier (tête 2) | Droit | |
| Longueur | 1 m | |
| Matériau du gaine extérieure | PUR sans halogène | |
| Nombre de pôles | 4 pôles | |
| Propriétés spéciale | Utilisable sur chaînes porte-câbles | |
| Type de connexion (tête 1) | Connecteur femelle | |
| Type de connexion (tête 2) | Connecteur mâle | |
| Utilisation | Câble de jonction pour Type de connecteur M8 |
|
| Données mécaniques | ||
| Acceleration (C-track) | max. 10 m/s² | |
| Bending radius (fixed) | min. 5 × outer diameter | |
| Bending radius (mobile) | min. 10 × outer diameter | |
| Head A: Degree of protection | IP65, IP66K, IP67 | |
| Head B: Degree of protection | IP65, IP66K, IP67 | |
| No. of torsion cycles | approx. 2000000 Cycles | |
| No. of bending cycles (C-track) | approx. 10000000 Cycles | |
| Torsion speed | max. 35 cycles/min | |
| Torsion stress in ° | ± 180 °/m | |
| Travel speed (C-track) | max. 3 m/s | |
| Données électriques | ||
| Contact resistance | max. 30 mOhm | |
| Nominal voltage | 300 V | |
| Operating voltage | max. 50 V AC / 60 V DC | |
| Operating voltage (only UL listed) | 30 V AC/DC | |
| Operating current per contact | max. 4 A | |
