optoPulse EN580E.IL-SC - SinCos | Incremental encoders

Technical data

show all

Technical data - electrical ratings

Voltage supply

5 VDC ±5 %

Reverse polarity protection

Short-circuit proof

Consumption w/o load

≤70 mA

Sinewave cycles per revolution

1024

Phase shift

90 ° ±10°

Sensing method

Optical

Output frequency

≤180 kHz (-3 dB)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

SinCos 1 Vpp

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-4

Approval

UL-Listing: E217823

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø10 x 20 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Clamping flange

Protection EN 60529

IP 54 (flange side)
IP 65 (housing side)

Operating speed

≤6000 rpm (+25 °C)

Starting torque

≤0.02 Nm

Material

Housing: aluminium
Solid shaft: stainless steel

Operating temperature

-25...+100 °C (see general information)

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6 Vibration 30 g, 10-2000 Hz
EN 60068-2-27 Shock 100 g, 11 ms

Connection

Connector M12, 8-pin, flexible

Weight approx.

300 g

Downloads

show all

Data sheet

Data sheet – EN580E.IL-SC - SinCos
- FR (pdf | 1 MB)
Data sheet – EN580E.IL-SC - SinCos
- DE (pdf | 1 MB)
Data sheet – EN580E.IL-SC - SinCos
- EN (pdf | 1022 KB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

Accessories

show all

Mounting accessories

	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Article no.: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Article no.: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=10) For encoder with solid shaft Article no.: 11069340	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Bellows coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 11053277	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Spring encoder arm Article no.: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options
	Mounting adaptor For encoders with clamping flange Article no.: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount

Connectors and cables

	Connection cable 5 m shielded with female connector M12, 8-pin, straight (ESG 34FH0500G) Article no.: 10129332	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, straight (ESG 34FH1000G) Article no.: 10129333	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 2 m shielded with female connector M12, 8-pin, angled (ESW 33FH0200G) Article no.: 11053961	Connection cable shielded with female connector M12, shielding on cap nut Cable length 2 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 5 m shielded with female connector M12, 8-pin, angled (ESW 33FH0500G) Article no.: 11053962	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, angled (ESW 33FH1000G) Article no.: 10170054	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836

To the top

Incremental encoders

optoPulse EN580E.IL-SC - SinCos

Solid shaft with clamping flange

Technical data

Technical data - electrical ratings

Technical data - mechanical design

Downloads

Data sheet

Certificates / approvals

Accessories

Mounting accessories

Connectors and cables