XC200 |
XC800 |
|
|
|
|
|
|
|
Code types | ||
Barcode | 2/5 Industrial 2/5 Interleaved Codabar Code 39 Code 93 Code 128 PharmaCode EAN 8 EAN 13 UPC-A UPC-E GS1 DataBar GS1 128 |
2/5 Industrial 2/5 Interleaved Codabar Code 39 Code 93 Code 128 PharmaCode EAN 8 EAN 13 UPC-A UPC-E GS1 DataBar GS1 128 |
Font | Sans serif fonts (e.g.: OCR-A,OCR-B, Arial, Tahoma, Courier, Univers, Frutiger, Verdana, Bookman, Franklin Gothic Book, Garamond, Nimbus San T, Palatino, Linotype, Sylfaen, Times New Roman, DIN 1451 Mittelschrift, DIN Neuzeit Grotesk LT Light, ITC Officina Sans, LT Book, Farrington 7B etc.) Dot Print Characters: A-Z a-z 0-9 + - . : / ( ) |
Sans serif fonts (e.g.: OCR-A,OCR-B, Arial, Tahoma, Courier, Univers, Frutiger, Verdana, Bookman, Franklin Gothic Book, Garamond, Nimbus San T, Palatino, Linotype, Sylfaen, Times New Roman, DIN 1451 Mittelschrift, DIN Neuzeit Grotesk LT Light, ITC Officina Sans, LT Book, Farrington 7B etc.) Dot Print Characters: A-Z a-z 0-9 + - . : / ( ) |
Matrix code | DataMatrix (ECC 200) GS1-DataMatrix QR-Code PDF417 |
DataMatrix (ECC 200) GS1-DataMatrix QR-Code PDF417 |
Conformity | ||
Conformity | CE RoHS KC (R-R-BkR-VeriSens-XC-IP) |
CE RoHS KC (R-R-BkR-VeriSens-XC-IP) UL recognized |
Electrical data | ||
Digital inputs | 5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz |
5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz |
Digital outputs | 5 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable |
5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable |
Initial setup | Ethernet (10BASE-T / 100BASE-TX) | Ethernet (10BASE-T / 100BASE-TX) |
Inputs | 8 … 30 V (polarity protected) | |
Nominal voltage power supply | 24 V ±25 % | |
Nominal voltage power supply (add-on) | Class 2 according to NEC / protection class III | |
Nominal voltage power supply (info) | The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC. | |
Outputs | PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof) | |
Power consumption | Typical 5 W (Imax = 1.5 A at 24 V) | Max. 42 W (with I/O and lighting) |
Process interface | TCP/UDP (Ethernet) | PROFINET (CC-A) EtherNet/IP™ TCP/UDP (Ethernet) |
Visualization | web interface | configurable web interface with MultiViewer function |
Voltage supply range +Vs | 18 … 30 V DC | |
Environmental conditions | ||
Case temperature | max. +50 °C | |
Humidity | 0 … 90 % (non-condensing) | 0 … 90 % (non-condensing) |
Mechanical shock resistance | EN 60068-2-27 | EN 60068-2-27 |
Operating temperature | +5 … +55 °C @ T = measurement point | +5 … +55 °C @ T = measurement point |
Protection class | IP 67 (with tube) | IP 67 (with tube) |
Storage temperature | -20 … +70 °C | -20 … +70 °C |
Vibration load | IEC 60068-2-6 IEC 60068-2-64 |
IEC 60068-2-6 IEC 60068-2-64 |
Feature checks | ||
Feature comparison | count contour points contour comparison brightness contrast area size count areas pattern comparison |
count contour points contour comparison brightness contrast area size count areas pattern comparison find object positions |
Geometry | Distance circle angle count edges point position edge characteristics |
Distance circle angle count edges point position edge characteristics |
Identification | Barcode Matrix code Text |
Barcode Matrix code Text |
Part location | Part location on contours Part location on edges Part location on circle Part location on text line |
Part location on contours Part location on edges Part location on circle Part location on text line |
General data | ||
Defect image memory | 8 | 8 |
Features per job | 32 | 32 |
High-resolution mode | max. 12 inspections per second | max. 32 inspections per second |
High-speed mode (limited resolution) | max. 25 inspections per second | max. 54 inspections per second |
Illumination | direct connection (integrated flash controller) | external, available as accessory |
Illumination connection | as accessory | direct (integrated VeriFlash® flash controller) |
Lens | C-mount | C-mount |
Number of jobs (products) | ≤ 255 | ≤ 255 |
Resolution | 1280 × 960 px | 1280 × 960 px |
Sensor type | 1/3″ CCD, monochrome | 1/3″ CCD, monochrome |
Signal processing | Baumer FEX® 4.0 | Baumer FEX® 4.0 |
Integrated flash controller | ||
Current | Imax = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) Imax = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C) |
Imax = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) Imax = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C) |
Flash time | max. 1 ms (Duty Cycle max. 1:10) | max. 1 ms (Duty Cycle max. 1:10) |
Voltage | 12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed) |
12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed) |
Mechanical data | ||
Depth | 49.8 mm (without lens/tube) | 49.8 mm (without lens/tube) |
Height | 99.5 mm (without lens/tube) | 99.5 mm (without lens/tube) |
Material | housing: aluminum cover glass: PMMA |
housing: aluminum cover glass XC tube: PMMA |
Weight | ≤ 300 g (without lens/tube) | ≤ 300 g (without lens/tube) |
Width | 53 mm (without lens/tube) | 53 mm (without lens/tube) |
Non-volatile memory | ||
Flash memory size | 256 Mbit Flash S29GL256P10FFI010 | 2000 Mbit Flash S34ML02G100BHI0000 |