Brazil
br
Português
High performance sensor |
Multitools |
|
|
|
|
|
|
|
|
|
| Conformity | CE UL |
|
| Interface | Ethernet TCP/IP | |
| Laser class | 1 | 1 |
| Laser wavelength | Red (660 nm) | |
| Light point shape (at reference distance) | Line Length (x) 80 mm Line Width (z) 200 µm |
|
| Light source | Pulsed red laser diode | |
| Max. laser power | 2,4 mW | |
| Protocol | Modbus TCP, OPC UA | |
| Wave length | 656 nm | |
| Webserver | Yes | |
| Condições ambientais | ||
| Ambient humidity | 20 ... 85 % | |
| Ambient light immunity | < 35 kLux | < 25 kLux |
| Ambient temperature | 0 ... + 45 °C | |
| Operating temperature | -10 … +50 °C | |
| Protection class | IP 67 | |
| Protection class (IEC 60529) | IP65 | |
| Shock (semi-sinusoidal) | IEC 60068-2-27:2009 30 g / 11 ms, 6 jolts per axis and direction |
30 g / 11 ms, 6 jolts per axis and direction IEC 60068-2-27:2009 |
| Storage temperature | -20 … +60 | - 10 ... + 60 °C |
| Vibration (sinusoidal) | IEC 60068-2-6:2008 1.5 mm p-p at f = 10 - 57 Hz, 10 cycles per axis 10 g at f = 58 - 2000 Hz, 10 cycles per axis |
1 mm p-p at f = 10 - 55 Hz, duration 5 min per axis 30 min endurance at f = 55 Hz per axis IEC 60068-2-6:2008 |
| Dados Elétricos | ||
| Analog output signal | 4-20mA, 2-10mA, 0-10V, 0-5V | |
| Current consumption max. (no load) | 150 mA | |
| Electrical connection | M12, 12-pin, A-coded, male | |
| Ethernet connection | USB-C for parametrisation | |
| Measuring frequency | 570 Hz 2) 3) | |
| Output current | 100 mA | |
| Power supply | typ. 2.4W (100 mA max at 24 V) | |
| Response time / release time | 3,5 ms 2) 3) | |
| Reverse polarity protection | Yes, Vs to GND | |
| Short circuit protection | Yes | |
| Switching output | Push-pull | |
| Switching outputs | 2 x Outputs (Push-Pull) | |
| Trigger input specification | Low Level: < 2.5 V High Level: 8 V ... +Ub |
|
| Voltage supply range +Vs | 15 … 28 VDC | 18 ... 30 VDC |
| Dados mecânicos | ||
| Connection types | Connector M12 8 pin & M12 4 pin | |
| Depth | 55 mm | 70 mm |
| Design | Rectangular, front view | |
| Dimensions (W x H x D) | 36 mm x 80 mm x 70 mm | |
| Front (optics) | Glass | |
| Height | 80 mm | |
| Height / length | 74 mm | |
| Housing material | Aluminum | |
| Material | Case: Die-cast zinc, Front Cover: PMMA | |
| Weight | 135 g | 450 g |
| Width | 36 mm | |
| Width / diameter | 26 mm | |
| dados gerais | ||
| Adjustment | Webserver, Ethernet TCP/IP | |
| Beam type | Multi-spot | |
| Clearance distance | 100 mm | |
| Ethernet link indication | LED blue | |
| Field of view (@Sdc ... Sde) | 48 ... 72 mm | |
| Linearity deviation Z | ± 0,2 % MR | |
| Linearity error | ± 30 … 90 µm 1) 2) 4) | |
| Measurement range MR | 50 mm | |
| Measuring distance Sd | 100 … 150 mm | |
| Measuring range (width) | 48 … 72 mm | |
| Output indicator | LED yellow / LED red | |
| Power on indication | LED green | |
| Profile points | 575 pixel | |
| Profiles per second | 200 ... 500 Hz | |
| Reference distance | 125 mm | |
| Repeat accuracy Z | 8 µm | |
| Resolution | 2 … 4 µm | |
| Resolution X (@Sdc ... Sde) | 80 ... 120 µm | |
| Resolution Z (@Sdc ... Sde) | 16 ... 30 µm | |
| Temperature drift | ± 0,04 % Sde/K 1) 2) 4) | ± 0,08 %Sde/K |
| Type | Distance measuring | Measuring mode (M): Height, Line/Angle, Area, Edge, Width/Gap, Intensity Edge, Circle, Caliper Z, Caliper X, Caliper Distance, Angle Gauge, Profile in x-z |
| Version | OM70 multi-spot | |
| Working range (Sdc ... Sde) | 100 ... 150 mm | |
| interfaces e conectores | ||
| Interfaces / output circuit | Serial RS485, 2 x Switching Output, Analog Output | |
| Protocols | Modbus RTU, IO-Link | |
| Software / parametrisation | Integrated Webserver for parametrisation | |
