O300.RR-GL1Z.72CU

Dados técnicos

mostrar tudo

dados gerais

Type

Retro-reflective sensor

Light source

Pulsed red LED

Actual range Sb

Nominal range Sn

Polarization filter

Light indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Wave length

630 nm

Suppression of reciprocal influence

Alignment optical axis

< 2°

Dados Elétricos

Response time / release time

< 0,49 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

30 mA

Current consumption typ.

30 mA

Voltage drop Vd

<3 VDC

Output function

Light operate

Output circuit

Push-pull

Output current

100 mA

Short circuit protection

Reverse polarity protection

Dados mecânicos

Width / diameter

12,9 mm

Height / length

32,3 mm

Depth

23 mm

Design

Rectangular

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Condições ambientais

Operating temperature

-25 … +60 °C

Protection class

IP 67

Modelo 3D

mostrar tudo

Modelo 3D

A criação de modelos CAD requer um registro externo no CADENAS.

Transferências

mostrar tudo

Data sheet

O300.RR-GL1Z.72CU
- DE (pdf | 141 KB)
O300.RR-GL1Z.72CU
- EN (pdf | 139 KB)
O300.RR-GL1Z.72CU
- FR (pdf | 142 KB)
O300.RR-GL1Z.72CU
- ZH (pdf | 318 KB)

Quickstart

Quickstart – O300.RR-GL1Z.72CU
- DE/EN/FR (pdf | 215 KB)

Certificates / approvals

DoC / CoC - O300
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 184 KB)

EPLAN

Link para o portal de dados
- Link para o portal de dados

Diagramas

mostrar tudo

Excess gain curve

(png | 219 KB)

(png | 211 KB)

Desenhos

mostrar tudo

Acessórios

mostrar tudo

Reflectors

FTDR 084A084

Reflector rectangular 84 x 84 mm

Artigo nº: 11101254

Fastening method screw mounting
For Retro-reflective sensors

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Artigo nº: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Artigo nº: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	Sensofix O300/U300 Artigo nº: 11104963	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	Mounting bracket O300/U300 (L design) Artigo nº: 11102423	Material: Steel
	Mounting bracket O300 - Retrofit for sensors series 20 Artigo nº: 11124807	Material: Steel
	Mounting rod with mounting plate holder 200 mm Artigo nº: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Artigo nº: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Artigo nº: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Artigo nº: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Artigo nº: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Artigo nº: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 300 and ø12 mm Artigo nº: 11707701	Material: Steel Part of an assembly
	Mounting base Artigo nº: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Artigo nº: 11707703	Material: Plastic (PA) Part of an assembly