2. Inductive sensors
  3. Product comparison

Inductive distance sensors - linearized

  • 0 … 10 mm
  • voltage output / PNP
  • Teach-in
  • connector M8
  • -10 … 70 °C
  • IP 67
  • Large measuring range from 0...10 mm
  • Analog output and additional switching output
  • Easy commissioning due to linearized output signal
  • Application specific adjustment by qTeach
  • Robust plastic housing usable up to +75°C
Inquire
Inquire
Ambient conditions
Operating temperature -10 … +70 °C -25 … +75 °C
Protection class IP 67 IP 67
Electrical data
Current consumption max. (no load) 30 mA 25 mA
Load resistance > 1000 Ohm > 10 kOhm
Output circuit Voltage output / PNP PNP
Analog 0 ... 10 VDC
Output current 10 mA (PNP) 100 mA
Output signal 0 ... 10 VDC
Response time (factory characteristic) < 2.5 ms < 2.3 ms
Response time (teach in characteristic) < 3.1 ms
Reverse polarity protection Yes Yes
Short circuit protection Yes Yes
Switching frequency 150 Hz
Voltage drop Vd <5 VDC (PNP) <2.5 VDC
Voltage supply range +Vs 15 … 30 VDC 12 … 30 VDC
General data
Adjustment Teach-in qTeach
Linearity error ± 50 µm ± 50 µm
Measuring distance Sd 0 … 10 mm 0 … 10 mm
Mounting type Quasi-flush Non-flush
Output indicator LED yellow
Power on indication LED green
Repeat accuracy 0.015 mm 0.02 mm
Resolution < 0.01 mm (stat.)
< 0.01 mm (dynam.)		 < 0.02 mm (stat.)
Special type Linearized Linearized
Teach Single point, Window
Temperature drift ± 5 % (Full Scale) ± 2 % (Full Scale)
Type Distance measuring
Mechanical data
Connection types Connector M8 Connector M8
Design Rectangular Rectangular
Dimension 20 mm 20 mm
Housing length 42 mm 41 mm
Housing material Polyester SAN
Material (sensing face) PBT SAN
To the top