Italia
it
Italiano
Inductive distance sensors - subminiature |
Inductive distance sensors - subminiature |
|
|
|
|
|
|
|
|
|
| AWG | 28 | 28 |
| Cable diameter | 2,4 mm | 2,4 mm |
| Cable length | 200 mm | 200 mm |
| External sheath: Material | PVC | PVC |
| Head A: Angle cable outlet | 0° | 0° |
| Head A: Coding | A | A |
| Head A: Connection | M8 | M8 |
| Head A: Degree of protection | IP65, IP66K, IP67 | IP65, IP66K, IP67 |
| Head A: Gender | Male | Male |
| Head A: No. of poles | 3 | 3 |
| Head A: Shielded | No | |
| Length tolerance | + 10 % - 0 % |
+ 10 % - 0 % |
| Shielded | No | No |
| Wire cross section | 0.08 mm² | 0.08 mm² |
| Condizioni ambientali | ||
| Temperatura d'esercizio | 10 … +60 °C | 10 … +60 °C |
| Tipo di protezione | IP 67 | IP 67 |
| Dati elettrici | ||
| Circuito di uscita | Voltage output | Voltage output |
| Corrente assorbita max. (senza carico) | 10 mA | 8 mA |
| Load resistance | > 3000 Ohm | > 4000 Ohm |
| Output signal | 0 ... 10 VDC | 0 ... 10 VDC |
| Protezione da cortocircuito | Si | Si |
| Protezione dall'inversione di polarità | Si | Si |
| Response time (factory characteristic) | < 1 ms | < 1 ms |
| Tensione di alimentazione +Vs | 15 … 30 VDC | 12 … 30 VDC |
| Dati generali | ||
| Linearity error | ± 100 µm | ± 120 µm |
| Measuring distance Sd | 0 … 2 mm | 0 … 2 mm |
| Mounting type | Quasi-flush | Flush |
| Repeat accuracy | 0,02 mm | 0,02 mm |
| Resolution | < 0,001 mm (stat.) < 0,005 mm (dynam.) |
< 0,001 mm (stat.) < 0,005 mm (dynam.) |
| Temperature drift | ± 5 % (Full Scale) | ± 5 % (Full Scale) |
| Dati meccanici | ||
| Connection types | Flylead connector M8 | Flylead connector PVC M8, L=200 mm |
| Design | Rectangular | Rectangular |
| Dimension | 8 mm | 8 mm |
| Housing length | 16 mm | 16 mm |
| Housing material | Die-cast zinc nickel plated | Die-cast zinc nickel plated |
| Material (sensing face) | PBT | PBT |
| Tightening torque max. | 0,8 Nm | 0,8 Nm |
