Italia
it
Italiano
Distance sensors |
||
|
|
|
|
|
|
|
|
| Additional data | Distance Excess gain Device temperature |
|
| Adjustable parameters | Switching point Operation mode Time filters LED-function Output logic Output circuit Analog output characteristic Deactivate the sensor element Locater function Teach-in mode |
|
| Baud rate | 230,4 kBaud (COM 3) | |
| Cycle time | ≥ 0,7 ms | |
| IO-Link port type | Class A | |
| Interface | IO-Link V1.1 | IO-Link V1.1.3 |
| Process data length | 48 Bit | |
| Process data structure | Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement |
|
| Condizioni ambientali | ||
| Shock (semi-sinusoidal) | IEC 60068-2-27:2009 50 g / 11 ms, 10 impulses per axis and direction |
|
| Storage temperature | -40 … +70 °C | |
| Temperatura d'esercizio | 0 … +50 °C | -25 … +60 °C |
| Tipo di protezione | IP 68/69K & proTect+ | IP 68/69K & proTect+ |
| Vibration (sinusoidal) | IEC 60068-2-6:2008 10 g at f = 10 - 2000 Hz, duration 150 min per axis |
|
| Dati elettrici | ||
| Alarm output | Push-pull | |
| Caduta di tensione Vd | <2 VDC | |
| Circuito di uscita | Analog | Analog 0 ... 10 VDC Push-pull / IO-Link |
| Corrente assorbita max. (senza carico) | 80 mA | 30 mA |
| Load resistance (analog U) | > 100 kOhm | |
| Output current | 100 mA | 100 mA (push-pull) |
| Output signal | 0 ... 10 VDC | |
| Protezione da cortocircuito | Si | Si |
| Protezione dall'inversione di polarità | Yes, Vs to GND | Yes, Vs to GND |
| Switching output | Light operate, switchable | |
| Tempo di risposta / di caduta | < 3 ms | < 1,5 ms (Raw) < 2,25 ms (High Speed Mode) < 4,5 ms (Standard Mode) < 14 ms (High Accuracy Mode) |
| Tensione di alimentazione +Vs | 14 … 26 VDC | 12 … 30 VDC |
| Dati generali | ||
| Adjustment | IO-Link | Teach-in and IO-Link |
| Allineamento asse ottico | < 1° | |
| Approvals/certificates | Ecolab | |
| Beam diameter | 8 mm | |
| Beam type | Point | Point |
| Linearity error | ± 1,5 … 4 mm | ± 3 % Mr |
| Measuring distance Sd | 50 … 400 mm | 60 … 550 mm |
| Measuring range Mr | 490 mm | |
| Output indicator | LED yellow | |
| Power on indication | LED green | LED green |
| Repeat accuracy | ≤ 200 … 5000 µm (Raw) ≤ 150 … 3750 µm (High Speed) ≤ 100 … 2500 µm (Standard) ≤ 50 … 1250 µm (High Accuracy) |
|
| Resolution | 100 … 1000 µm | |
| Soiled lens indicator | LED red | |
| Special type | Washdown design | |
| Suppression of reciprocal influence | Si | |
| Teach-in range min. | > 20 mm | |
| Temperature drift | < 0,1 % Sde/K | < 0,3 % Sde/K |
| Type | Distance measuring | |
| Dati meccanici | ||
| Connection types | Connector M12 | Connector M12 5 pin |
| Depth | 34,3 mm | 37,7 mm |
| Design | Rectangular | Rectangular |
| Front (optics) | PMMA | PMMA |
| Height / length | 51 mm | 47,9 mm |
| Housing material | Stainless steel 1.4404 (V4A); LSR | Stainless steel 1.4404 (V4A) |
| Width / diameter | 19,6 mm | 20,2 mm |
| Fonte di luce | ||
| Light source | Pulsed point source LED | Pulsed PinPoint LED |
| Wave length | 660 nm | 630 nm |
