2. Albero cavo da 3/8 fino a 1 pollice
  3. Confronto prodotti

Through hollow shaft ø27 mm

  • High resolution programmable encoder
  • Optical sensing method
  • Max. 320000 pulses per revolution
  • Programmable via BISS
  • Small profile depth
  • Through hollow shaft ø27 mm

Insulated through hollow shaft ø0.375...1 inch

  • Robust industrial encoder up to IP 67 protection
  • Shock resistant up to 200 g's
  • Insulating insert to prevent high shaft currents from damaging bearings
  • Wide range voltage supply 4.75...30 VDC
  • Precision ≤60 arc-seconds for perfect process control
  • Max. 80000 pulses per revolution
Dati tecnici - Valori elettrici
Accuracy ≤60 arc-seconds
Approvazione UL approval / E217823 UL approval / E240061
RoHS compliant EU guideline 2011/65/EC
CE
Corrente operativa senza carico ≤40 mA (24 VDC)
≤130 mA (4.75 VDC) + output load, max. 250 mA
Emissione di interferenze EN 61000-6-3 EN 61000-6-3
Frequenza di uscita ≤300 kHz (24K)
≤1300 kHz (05A)		 ≤300 kHz (TTL)
≤160 kHz (HTL)
Immunità alle interferenze EN 61000-6-2 EN 61000-6-2
Impulsi per giro 10000 … 320000 1024 … 80000
Livelli di uscita Antivalent
Push-pull short-circuit proof		 Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof
Push-pull (HTL, 7272) Vout = Vin, short-circuit proof
Principio di scansione Ottico Ottico
Reverse polarity protection Yes
Segnale di riferimento Zero pulse, programmable
Segnale di uscita A 90° B, N + invertito A, B, Z
A, B, Z + complement, ½ cycle index gated with negative B channel
Tensione operativa 5 VDC ±10 %
10...30 VDC		 4.75...30 VDC
Tip. corrente operativa 80 mA (5 VDC, w/o load)
60 mA (24 VDC, w/o load)
Dati tecnici - progettazione meccanica
Admitted misalignment 0.004" (0.1016 mm) radial TIR (end of shaft)
0.01" (0.254 mm) axial
Allacciamento Connector M23, 12-pin
Cable 2 m		 MIL-connector, 7-pin
MIL-connector, 10-pin
Cable (AWG26 wire)
Bearing 52100 SAE high carbon steel (ABEC 5)
Bore runout 0.0016" (0.04 mm) TIR max.
Classe di protezione EN 60529 IP 65
IP 42		 IP 54
IP 65
IP 67
Coppia di spunto ≤3 in-oz (77 °F, IP 65)
≤0,02 Nm (+25 °C, IP 65)
Grandezza (flangia) ø80 mm ø3.15" (ø80 mm)
Materiale Housing: aluminium
Flange: aluminium		 Housing: aluminium, powder-coated
Shaft: stainless steel
Peso ca. 500 g 23 oz.
660 g
Relative humidity 95 % non-condensing 98 % non-condensing
Resistenza EN 60068-2-6
Vibrazione 10 g, 10-2000 Hz
EN 60068-2-27
Urti 50 g, 11 ms		 EN 60068-2-6 Vibrazione 20 g, 60-2000 Hz
EN 60068-2-27 Urti 200 g, 6 ms
Rotore momento d‘inerzia 2,3 oz-in² (420 gcm²)
Service life Bearing: typ. 13 billion rev. (89000 h/2500 rpm)
Temperatura operativa -20...+85 °C -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram
Tip. coppia operativa 0,0075 Nm (IP 42)
0,03 Nm (IP 64)
Tipo di albero ø27 mm (through hollow shaft) ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated)
Velocità operativa ≤12000 rpm (IP 42)
≤6000 rpm (IP 65)		 ≤5000 rpm (see temperature diagram)
In alto