2. G1MMH
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 10...30 VDC
Reverse polarity protection
  • Yes
Corrente operativa senza carico
  • ≤100 mA (24 VDC)
Initializing time typ.
  • 250 ms after power on
Interface
  • CANopen®
  • Profibus-DPV0
Function
  • Multiturn
Device adress
  • Rotary switches in bus cover
Steps per revolution
  • ≤8192 / 13 bit
Number of revolutions
  • ≤65536 / 16 bit
Absolute accuracy
  • ±0,025 °
Principio di scansione
  • Ottico
Code
  • Binary
Code sequence
  • CW/CCW programmable
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-4
Programmable parameters
  • Steps per revolution
  • Number of revolutions
  • Preset
  • Scaling
  • Rotating direction
Diagnostic function
  • Position or parameter error
  • Multiturn sensing
Status indicator
  • DUO-LED integrated in bus cover
Approvazione
  • UL approval / E63076
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø90 mm
Tipo di albero
  • ø16...25.4 mm (through hollow shaft)
Classe di protezione EN 60529
  • IP 54
  • IP 65 (optional)
Velocità operativa
  • ≤3800 giri/min (meccanico)
  • ≤6000 rpm (electric)
Coppia di spunto
  • ≤0,35 Nm (+25 °C)
Rotore momento d‘inerzia
  • 2000 gcm²
Materiale
  • Housing: aluminium
  • Flange: aluminium
  • Bus cover: aluminium
Temperatura operativa
  • -25...+85 °C
  • -40...+85 °C (optional)
Relative humidity
  • 95 % non-condensing
Resistenza
  • EN 60068-2-6
  • Vibrazione 10 g, 16-2000 Hz
  • EN 60068-2-27
  • Urti 200 g, 6 ms
Peso ca.
  • 890 g
Allacciamento
  • Bus cover
software
Software

Scaricare
Data sheet
Quickstart
Software Manual
Certificates / approvals
Bus cover
Declaration of conformity
CAD

Disegni
Drawings
The selected altAttribute does not exist!

(png | 129 KB)
Accessori
Accessori di montaggio
Mounting hollow shaft encoders – Rubber buffer element 18.5 mm long, as torque support (Z 119.037) Rubber buffer element 18.5 mm long, as torque support (Z 119.037)

Articolo n..: 11034095
  • Rubber buffer element as torque support
Mounting hollow shaft encoders – Shoulder screw M5 as torque support (Z 119.040) Shoulder screw M5 as torque support (Z 119.040)

Articolo n..: 11034097
  • Easy mounting in confined a place since no radial space required
  • For applications with limited space consumption
Mounting hollow shaft encoders – Torque support by rubber buffer for encoders with 15 mm pin (Z 119.041) Torque support by rubber buffer for encoders with 15 mm pin (Z 119.041)

Articolo n..: 10139345
  • Easy and cost-effective mounting
  • For applications with high acceleration
Mounting hollow shaft encoders – Spring coupling for GX and G1 (Z 119.043) Spring coupling for GX and G1 (Z 119.043)

Articolo n..: 10143969
  • Rigid spring coupling for high-dynamic applications
Torque arm, 1-arm (mounting kit 056)

Articolo n..: 11066120
  • For low-dynamic applications and constant movements
Clamping ring set 28.4/50x12 - stainless steel (Z 119.102) Clamping ring set 28.4/50x12 - stainless steel (Z 119.102)

Articolo n..: 11210157
  • Clamping ring set in stainless steel
In alto