España
es
Español
Gigabit Ethernet, 12.2 Megapixel, Monochrome |
Gigabit Ethernet, 12.2 Megapixel, Monochrome |
|
|
|
|
|
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono | Mono |
| Conformity | CE RoHS |
CE RoHS |
| Dark noise | 2,33 e- | 2,33 e- |
| Dynamic range | 69,7 dB | 69,7 dB |
| Flash memory size | 128 kB | 128 kB |
| Quantum efficiency | 65,1 % @ 535 nm | 65,1 % @ 535 nm |
| Saturation capacity | 9087 e- | 9087 e- |
| Signal-to-noise ratio | 39,6 dB | 39,6 dB |
| Condiciones del entorno | ||
| Humidity | 10 … 90 % (non-condensing) | 10 … 90 % (non-condensing) |
| Operating temperature | 0 … +65 ° @ T = measurement point | 0 … +65 ° @ T = measurement point |
| Protection class | IP 40 (with mounted lens and cable) IP 54 (with mounted lens and cable) IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) IP 69K (with stainless steel housing accessory) |
IP 40 (with mounted lens and cable) IP 54 (with mounted lens and cable) IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) IP 69K (with stainless steel housing accessory) |
| Storage temperature | -20 … +70 °C | -20 … +70 °C |
| Datos eléctricos | ||
| Power consumption | Approx. 2.6 W @ 12 VDC and 10 fps Approx. 3.2 W @ 48 VDC (PoE) and 10 fps |
Approx. 3.1 W @ 12 VDC and 10 fps Approx. 3.8 W @ 48 VDC (PoE) and 10 fps |
| Voltage supply range +Vs | 12 … 24 V DC (external power supply) 36 … 57 V DC (Power over Ethernet) |
12 … 24 V DC (external power supply) 36 … 57 V DC (Power over Ethernet) |
| Datos mecánicos | ||
| Depth | 50,8 mm | 50,8 mm |
| Height | 40 mm | 40 mm |
| Lens mount | C-mount | C-mount |
| Material | aluminum, hard-anodized | aluminum, hard-anodized |
| Weight | ≤ 137 g | ≤ 137 g |
| Width | 40 mm | 40 mm |
| E/S digitales | ||
| Lines | 4 input lines 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) |
4 input lines 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) |
| Output line sources | Off Line 0-3 Exposure Active Timer1Active Readout Active UserOutput 1-4 TriggerReady |
Off Line 0-3 Exposure Active Timer1Active Readout Active UserOutput 1-4 TriggerReady |
| Interfaces y conectores | ||
| Data interface | Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type | Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type |
| Power supply | via M12/12 pins a-coded or Power over Ethernet (PoE) | via M12/12 pins a-coded or Power over Ethernet (PoE) |
| Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
| características de la cámara | ||
| Acquisition / Interface | Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer |
Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
User Set Integrated temperature sensor Readable additional information (e.g. sensor information) |
| Auto Functions | Exposure Auto Gain Auto |
Exposure Auto Gain Auto |
| Basic Functions | Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Calibration data | Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined) |
|
| Image Pre-processing | Image Flipping (X/Y) LUT / Gamma |
Image Flipping (X/Y) LUT / Gamma |
| Internal image buffer | 141 MB 4 image (Trigger Mode) 1 image (Free Running Mode) |
141 MB 4 image (Trigger Mode) 1 image (Free Running Mode) |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source |
Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Synchronization | free running trigger |
free running trigger |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Trigger sources | Hardware Software ActionCommand |
Hardware Software ActionCommand |
| formatos de adquisición | ||
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 4096 × 2992 px, max. 11 fps | Full Frame, 4096 × 2992 px, max. 11 fps |
| Image formats, interface frame rate max. | Full Frame, 4096 × 2992 px, max. 10 fps Binning 2×2, 2048 × 1496 px, max. 36 fps Binning 2×1, 2048 × 2992 px, max. 11 fps Binning 1×2, 4096 × 1496 px, max. 11 fps |
Full Frame, 4096 × 2992 px, max. 10 fps Binning 2×2, 2048 × 1496 px, max. 40 fps Binning 2×1, 2048 × 2992 px, max. 11 fps Binning 1×2, 4096 × 1496 px, max. 11 fps |
| Pixel formats | Mono8 Mono10 Mono12 Mono12 Packed |
Mono8 Mono10 Mono12 Mono12 Packed |
| información del sensor | ||
| Exposure time | 0,001 … 60000 ms | 0,001 … 60000 ms |
| Mono/Color | Mono | Mono |
| Pixel size | 2.74 × 2.74 µm | 2.74 × 2.74 µm |
| Resolution | 4096 × 2992 px | 4096 × 2992 px |
| Sensor | Sony IMX545 Gen4 | Sony IMX545 Gen4 |
| Sensor type | 1/1.1" CMOS | 1/1.1" CMOS |
| Shutter type | Global shutter | Global shutter |
