Connector M12, 8 pin, straight, 5 m, Niro, shielded |
|||
|
|
|
|
|
|||
Acceleration (C-track) | max. 2 m/s² | ||
Bending radius (fixed) | min. 7,5 × outer diameter | ||
Bending radius (mobile) | min. 10 × outer diameter | ||
Cable diameter | 6,7 mm ± 5% | 6,7 mm ± 5% | |
Cable length | 500 cm | 500 cm | |
Cable weight | approx. 66 g/m | ||
Cable: Temperature range (fixed) | - 40 ...+ 105 °C | ||
Cable: Temperature range (mobile) | - 20 ...+ 105 °C | ||
Cable: Test voltage | 3 kV | ||
Conductor structure | 32 × 0,1 mm | 32 × 0,1 mm | |
Conductor: Material | Copper, bare | ||
Eclass | 27060311 | ||
External sheath: Color | Blue | Blue | |
External sheath: Material | TPE-S | TPE-S | |
External sheath: Shore hardness | 47 ± 5 D | ||
Head A: Angle cable outlet | 0° | ||
Head A: Body color | Blue | ||
Head A: Coding | A | ||
Head A: Connection | M12 | ||
Head A: Gasket material | EPDM | ||
Head A: Gender | Female | ||
Head A: Knurled nut material | Stainless steel (V4A) | ||
Head A: LED | No | ||
Head A: No. of poles | 8 | ||
Head A: Tightening torque | 0,6 Nm | ||
Head A: Width across flats | AF14 | ||
Head B: Connection | Open-ended wires | ||
Insulation: Material | PP | ||
Labeling sleeve side A | No | ||
Labeling sleeve side B | No | ||
Length tolerance | ± 7,5 cm | ± 7,5 cm | |
No. of bending cycles (C-track) | approx. 2000000 Cycles | ||
Nominal voltage | 300 V AC | ||
Number and diameter of wires | 8x0,25 | ||
Number of wires | 8 | ||
Paired stranding | No | ||
Shielded | Si | Si | |
Shielding attenuation | 0 | ||
Shielding: Covering | approx. 85 % | ||
Shielding: Material | Copper, tinned | ||
Single wire diameter | 0,1 mm | ||
Stripping length | 60 mm | ||
Total stranding | 8 wires strand around core-filler | ||
Travel speed (C-track) | max. 3,3 m/s | ||
Traversing path (horizontal) | max. 5 m | ||
Wire 1: Color | WH | ||
Wire 2: Color | BN | ||
Wire 3: Color | GN | ||
Wire 4: Color | YE | ||
Wire 5: Color | GY | ||
Wire 6: Color | PK | ||
Wire 7: Color | BU | ||
Wire 8: Color | RD | ||
Wire cross section | 0.25 mm² | 0.25 mm² | |
Wire diameter incl. isolation | 1,25 mm ± 5% | ||
Wire processing | No | ||
Condiciones del entorno | |||
Cable: Acid and alkali resistant | Good (FDA 21 178.3620, 178.3297, 177.1520, EU 10/2011) | ||
Cable: Silicone-free | Si | ||
Cable: Temperature range (fixed) | - 40 ...+ 105 °C | ||
Dragchain capable | Si | ||
Head A: Acid and alkali resistant | ECOLAB tested | ||
Head A: Chemical resistance | Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application. | ||
Head A: Flame resistance | HB (UL 94) | ||
Head A: Oil resistance | ASTM 1 oil, mineral oils, limited to hydraulic oils | ||
Temperature range (fixed) | - 40 ...+ 105 °C | ||
Temperature range (mobile) | - 20 ...+ 105 °C | ||
Datos eléctricos | |||
Contact resistance | max. 30 mOhm | ||
Nominal voltage | 300 V AC | ||
Operating voltage | max. 30 V AC/DC | ||
Operating current per contact | max. 2 A | ||
Datos generales | |||
Connection type (head 1) | Connector female | ||
Connection type (head 2) | Free cable end | ||
Dimension (head 1) | M12 | ||
Length | 5 m | ||
Material cable jacket | TPE | ||
Number of positions | 8 pins | ||
Protection class | IP 67/69K | ||
Shielding | Shielded | ||
Type (head 1) | Straight | ||
Usage | Connecting cable for Connector type M12 |
||
Datos mecánicos | |||
Acceleration (C-track) | max. 2 m/s² | ||
Bending radius (fixed) | min. 7,5 × outer diameter | ||
Bending radius (mobile) | min. 10 × outer diameter | ||
Head A: Degree of protection | IP65, IP68, IP69K | ||
No. of bending cycles (C-track) | approx. 2000000 Cycles | ||
Travel speed (C-track) | max. 3,3 m/s |